00198355-01_AI_Arbitrary_Flex_JEDEC_tray_SOKO_en.pdf - 第20页

Item no.: 00198355-01 ASM Assembly Systems Singapore Pte Ltd 535 Yishun Industrial Park A ASM Tech-Park Building 2 Singapore 768775 www.asm-smt.com

100%1 / 20
2 Installation of Arbitrary JEDEC Tray
2.3 Installation Procedure
Assembly Instructions E by SIPLACE
Arbitrary Flex JEDEC tray SOKO 04/2017
18
► Reassemble the respective nozzle magazines but with the shown restrictions.
NOTICE
Validity of Single Nozzle Magazine
Mounting of "Single nozzle magazine" [03109863-xx], in location 2.2 is only valid for "E-by
SIPLACE FLEX" machines without flip chip camera, at the positions shown above.
Additional Restrictions:
●
This SOKO is applicable only for E by SIPLACE - FLEX RV12 variant only.
●
The combine height for JEDEC tray + components should not be higher than 15mm.
●
Single nozzle magazine [03109863-xx], it NOT recommended for use in location 2.2.
Item no.: 00198355-01 ASM Assembly Systems Singapore Pte Ltd
535 Yishun Industrial Park A
ASM Tech-Park Building 2
Singapore 768775
www.asm-smt.com