00196428-0102_AI_Reconfig_Kit_X-Serie_CPP_DE+EN.pdf - 第115页
Head Reconfiguration Kit 2 Assembly Instructions Head Reconfiguration Kit CPP fo r the SIPLACE X Ser ies Issue 03/2010 2.8 Removing the Placement Head 115 2.8.3 Removing the CPP Placement Head X Disconnect t he two flat …
2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series Head Reconfiguration Kit
2.8 Removing the Placement Head Issue 03/2010
114
2.8.2 Saving the Existing Machine Data
X Plug a USB stick or another appropriate storage medium into the USB port of the station com-
puter.
2
2
X Save the machine data to the storage medium. To do so, select Service --> machine data ->
save...
X Undock the component trolleys.
X Shutdown the station computer and switch off the placement machine at the main switch. Dis-
connect the machine from the power supply and the pneumatic supply.
USB stick
BoxPC
Head Reconfiguration Kit 2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series
Issue 03/2010 2.8 Removing the Placement Head
115
2.8.3 Removing the CPP Placement Head
X Disconnect the two flat ribbon cables.
CAUTION:
Wear an ESD wrist strap during the whole work on the placement head and the servos!2
CAUTION:
Remove the axis and servo cards.
For this purpose, observe the overviews in the annex in Chapter 2.9.1 Configuration Axis
Unit A364. 2
NOTE:
The reconfiguration can most conveniently be performed via locations 2 and 4. 2
Disconnecting the flat ribbon cables
2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series Head Reconfiguration Kit
2.8 Removing the Placement Head Issue 03/2010
116
X Disconnect all pressured air hoses.
Disconnecting the pressured air hoses