504222_datasheet.pdf - 第3页

Units PSENmag PSEN 1.1p-22 SEN-D-2-018-2007-03 Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straß e 2, 73 760 Ostfildern, Germany Telephone: +49 711 3409-0, Telefax: +4 9 711 3409-133 , E-Mail: pilz.gmbh@pilz…

100%1 / 6
Units
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSENmag
PSEN 1.1p-22
SEN-D-2-018-2007-03
2.2-47
2.2
Operating distances
Lateral and vertical offset
` Assured operating distance S
ao
in
mm
` Assured release distance S
ar
:
Max. 26 mm with all vertical and
lateral offsets
The stated values are valid at a tem-
perature of 20 °C.
Wiring
Please note:
` Information given in the “Technical
details” must be followed.
` Calculation of the max. cable runs
l
max
in the input circuit:
R
lmax
= max. overall cable resist-
ance (see Technical details)
R
l
/ km = cable resistance/km
` When using evaluation devices with
delay-on de-energisation contacts,
please note:
–Delay time ≤ 30 s: Delay-on de-
energisation contacts satisfy the
requirements of category 3 in ac-
cordance with EN 954-1 and the
requirements of a PDF with sin-
gle-fault tolerance (PDF-S).
–Delay time ≥ 30 s: Delay-on de-
energisation contacts satisfy the
requirements of Category 1 in
accordance with EN 954-1 and
the requirements of a PDF with
designed reliability (PDF-D).
` In the following commissioning cas-
es, check the function that detects
shorts across contacts:
– On evaluation devices with DC
supply voltage: Overall cable re-
sistance ≥ 15 Ohms per channel
– On evaluation devices with AC
supply voltage: Overall cable re-
sistance ≥ 25 Ohms per channel
– For details of how to perform the
test for shorts across the con-
tacts, please refer to the operat-
ing manual for the relevant
evaluation device.
Connections
NOTICE
The colour marking for the connection
lead only applies for the cable that Pilz
supplies as an accessory.
The safety switch is shown in an unop-
erated condition.
Seitenversatz/Lateral offset/
Décalage latéral
Höhenversatz/Height offset/
Décalage en hauteur
aktive Fläche
active area
surface active
Schaltabstand/Operating distance/
Portee de travail
s
ao
= 8
s
ar
= 26
Ein/On/Marche
Aus/Off/Arrêt
s
omin
= 0,5
Seitenversatz/Lateral offset/
Décalage latéral
Höhenversatz/Height offset/
Décalage en hauteur
aktive Fläche
active area
surface active
Schaltabstand/Operating distance/
Portee de travail
s
ao
= 8
s
ar
= 26
Ein/On/Marche
Aus/Off/Arrêt
s
omin
= 0,5
Seitenversatz/Lateral offset/
Décalage latéral
Höhenversatz/Height offset/
Décalage en hauteur
aktive Fläche
active area
surface active
Schaltabstand/Operating distance/
Portee de travail
s
ao
= 8
s
ar
= 26
Ein/On/Marche
Aus/Off/Arrêt
s
omin
= 0,5
Seitenversatz/Lateral offset/
Décalage latéral
Höhenversatz/Height offset/
Décalage en hauteur
aktive Fläche
active area
surface active
Schaltabstand/Operating distance/
Portee de travail
s
ao
= 8
s
ar
= 26
Ein/On/Marche
Aus/Off/Arrêt
s
omin
= 0,5
Seitenversatz/Lateral offset/
Décalage latéral
Höhenversatz/Height offset/
Décalage en hauteur
aktive Fläche
active area
surface active
Schaltabstand/Operating distance/
Portee de travail
s
ao
= 8
s
ar
= 26
Ein/On/Marche
Aus/Off/Arrêt
s
omin
= 0,5
5,0
5,0
2,0
1,0
3,0
4,0
3,02,01,0 4,0
5,57,07,57,5 7,0
5,57,07,07,5 6,5
5,57,07,07,0 6,0
6,0
6,56,5
6,06,0 6,0
5,5
5,0
5,0
4,5
Seitenversatz/Lateral
offset/Décalage latéral
Höhenversatz/Height offset/
Décalage en hauteur
5,0
5,0
2,0
1,0
3,0
4,0
3,02,01,0 4,0
5,57,07,57,5 7,0
5,57,07,07,5 6,5
5,57,07,07,0 6,0
6,0
6,56,5
6,06,0 6,0
5,5
5,0
5,0
4,5
Seitenversatz/Lateral
offset/Décalage latéral
Höhenversatz/Height offset/
Décalage en hauteur
R
lmax
R
l
/ km
I
max
=
Belegung des 4-pol. M8-
Stiftsteckers/Assignment
of the 4-pin M8 male con-
nector/Repérage du con-
necteur mâle M8 à 4 pôles
1
2
3
4
1
2
3
4
Units
PSENmag
PSEN 1.1p-22
SEN-D-2-018-2007-03Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
2.2-48
2.2
` Connection to PNOZ X, PNOZpow-
er, PNOZelog, PNOZsigma
PNOZ p1p
PNOZ p1vp
PNOZ X2/X2P
PNOZ X2.1
(nur 24 V DC/
24 V DC only/
24 V DC seulement)
PNOZ X2.3P
PNOZ X2.7P
PNOZ X2.8P/X2.9P
PNOZ X2C
PNOZ X2.1C
(nur 24 V DC/
24 V DC only/
24 V DC seulement)
PNOZ X4/X8P
PNOZ X9/X9P
PNOZ X10/X10.1
PNOZ X10.11P
PNOZ Ex
PNOZ e1p
PNOZ e1.1p
PNOZ e1vp
PNOZ e6.1p
PNOZ e6vp
PNOZ s3
PNOZ s4
PNOZ s5
PNOZ p1p
PNOZ p1vp
PNOZ X2/X2P
PNOZ X2.1
(nur 24 V DC/
24 V DC only/
24 V DC seulement)
PNOZ X2.3P
PNOZ X2.7P
PNOZ X2.8P/X2.9P
PNOZ X2C
PNOZ X2.1C
(nur 24 V DC/
24 V DC only/
24 V DC seulement)
PNOZ X4/X8P
PNOZ X9/X9P
PNOZ X10/X10.1
PNOZ X10.11P
PNOZ Ex
PNOZ e1p
PNOZ e1.1p
PNOZ e1vp
PNOZ e6.1p
PNOZ e6vp
PNOZ s3
PNOZ s4
PNOZ s5
S21
S22
S11
S12
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
S21
S22
S11
S12
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
PNOZ X5
PNOZ X5J
S11
S22
S11
S12
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
S11
S22
S11
S12
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
PNOZ 11
PNOZ 16
PNOZ X11P
PNOZ X13
PNOZ X3.1
PNOZ X3P
PNOZ X2.5P
PNOZ X3
PNOZ X3.10P
PNOZ XV2
PNOZ XV2P
PNOZ XV3
PNOZ XV3P
S31
S32
S21
S22
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
PNOZ X6 (mit Brücke/with link/avec pontage Y3-Y4)PNOZ X6 (mit Brücke/with link/avec pontage Y3-Y4)
S23
S24
S11
S12
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
S23
S24
S11
S12
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
PMUT X1P
S61
S62
S51
S52
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
S61
S62
S51
S52
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
PNOZ e5.11p
A1
S22
A1
S12
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
A1
S22
A1
S12
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
A1
S42
A1
S32
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
A1
S42
A1
S32
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
Units
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSENmag
PSEN 1.1p-22
SEN-D-2-018-2007-03
2.2-49
2.2
` Connection to PNOZmulti
` Connection to PSS with and with-
out SafetyBUS p
CAUTION!
The safety switches may only be oper-
ated on a PSS in conjunction with
standard function block SB064 or
SB066.
Installation
` The unit can be installed in any po-
sition. However, safety switches
and actuators must be positioned
opposite each other in parallel:
` If possible, do not install the safety
switch and actuator on to ferromag-
netic material. Changes to the oper-
ating distances are to be expected.
In this case, use the spacer availa-
ble under order number 534 310.
` Safety switches and actuators
should only be secured using M4
screws with a flat head (e.g. M4
cheese-head or pan head screws).
Torque setting max. 1 Nm. Use
screws made of non-magnetic ma-
terial (e.g. Messing).
` The distance between two systems
comprising safety switch and actu-
ator must be at least 25 mm.
` Safety switch and actuator
– Keep away from iron swarf
– Do not expose to strong mag-
netic fields
– Do not expose to heavy shock or
vibration
– Do not use as a limit stop
Adjustment
` The safety switch may only be used
with the corresponding actuator
PSEN 1,1-20.
` Always test the function with the
PSEN ix1 interface and one of the
approved evaluation devices.
` The stated operating distances (see
Technical details) only apply when
the safety switch and actuator are
installed facing each other in paral-
lel. Switching distances may devi-
ate if other arrangements are used.
Note the maximum permitted later-
al and vertical offset (see "Operat-
ing distances" and "Max. lateral
and vertical offset").
Schutztür/safety gate/protecteur mobile
Schaltertyp 3/switchtype 3/type du capteure 3
I0, I1: Eingänge/inputs/entrées
T0, T1: Taktausgänge/test pulse outputs/sorties
impulsionelles
T1
I1
T0
I0
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
Schutztür/safety gate/protecteur mobile
Schaltertyp 3/switchtype 3/type du capteure 3
I0, I1: Eingänge/inputs/entrées
O16, O17: Taktausgänge/test pulse outputs/sorties
impulsionelles
O 17
I 01
O 16
I 00
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4