504222_datasheet.pdf - 第5页

Units PSENmag PSEN 1.1p-22 SEN-D-2-018-2007-03 Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straß e 2, 73 760 Ostfildern, Germany Telephone: +49 711 3409-0, Telefax: +4 9 711 3409-133 , E-Mail: pilz.gmbh@pilz…

100%1 / 6
Units
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSENmag
PSEN 1.1p-22
SEN-D-2-018-2007-03
2.2-49
2.2
` Connection to PNOZmulti
` Connection to PSS with and with-
out SafetyBUS p
CAUTION!
The safety switches may only be oper-
ated on a PSS in conjunction with
standard function block SB064 or
SB066.
Installation
` The unit can be installed in any po-
sition. However, safety switches
and actuators must be positioned
opposite each other in parallel:
` If possible, do not install the safety
switch and actuator on to ferromag-
netic material. Changes to the oper-
ating distances are to be expected.
In this case, use the spacer availa-
ble under order number 534 310.
` Safety switches and actuators
should only be secured using M4
screws with a flat head (e.g. M4
cheese-head or pan head screws).
Torque setting max. 1 Nm. Use
screws made of non-magnetic ma-
terial (e.g. Messing).
` The distance between two systems
comprising safety switch and actu-
ator must be at least 25 mm.
` Safety switch and actuator
– Keep away from iron swarf
– Do not expose to strong mag-
netic fields
– Do not expose to heavy shock or
vibration
– Do not use as a limit stop
Adjustment
` The safety switch may only be used
with the corresponding actuator
PSEN 1,1-20.
` Always test the function with the
PSEN ix1 interface and one of the
approved evaluation devices.
` The stated operating distances (see
Technical details) only apply when
the safety switch and actuator are
installed facing each other in paral-
lel. Switching distances may devi-
ate if other arrangements are used.
Note the maximum permitted later-
al and vertical offset (see "Operat-
ing distances" and "Max. lateral
and vertical offset").
Schutztür/safety gate/protecteur mobile
Schaltertyp 3/switchtype 3/type du capteure 3
I0, I1: Eingänge/inputs/entrées
T0, T1: Taktausgänge/test pulse outputs/sorties
impulsionelles
T1
I1
T0
I0
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
Schutztür/safety gate/protecteur mobile
Schaltertyp 3/switchtype 3/type du capteure 3
I0, I1: Eingänge/inputs/entrées
O16, O17: Taktausgänge/test pulse outputs/sorties
impulsionelles
O 17
I 01
O 16
I 00
blau/blue/bleu
weiß/white/blanc
braun/brown/marron
schwarz/black/noir
11
12
13
14
1
2
3
4
PSEN ix1
1
2
3
4
Units
PSENmag
PSEN 1.1p-22
SEN-D-2-018-2007-03Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
2.2-50
2.2
NOTICE
This data sheet is only intended for use
during configuration. For installation
and operation, please refer to the op-
erating instructions supplied with the
unit.
Dimensions
26
19
22
36
10,6
M8x1
8,5
4,5
6,8
13
6,5
19
22
36
8,5
4,5
13
26
Safety switch
Actuator
Technical details
Switching distances
Assured operating distance S
ao
8 mm
Min. operating distance S
omin
0.5 mm
Assured release distance S
ar
26 mm
Switching voltage 24 V
Max. switching current for reed contacts 0.50 A
Max. breaking capacity for reed contacts 10.0 W
Max. switch frequency 1 Hz
Actuator PSEN 1,1-20
Ambient temperature -10 - 55 °C
Vibration to EN 60947-5-2
Frequency 10 - 55 Hz
Amplitude 1.00 mm
Shock stress 30 g , 11 ms
Connection type M8
Cable LiYY 4 x 0,25 mm
2
Protection type IP65, IP67
Housing material PBT
Units
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSENmag
PSEN 1.1p-22
SEN-D-2-018-2007-03
2.2-51
2.2
The standards current on 2006-12 apply.
Dimensions
Safety switch
Height 42.8 mm
Width 26.0 mm
Depth 13.0 mm
Actuator
Height 36 mm
Width 26 mm
Depth 13 mm
Weight
Safety switch 14 g
Actuator 17 g
Technical details
Order reference
Type Quantity Operation Features Order no.
PSEN 1.1p-22 1/1 magnetic Safety switch/actuator 504 222
PSEN 1.1p-22 (switch) 1 magnetic Safety switch 524 122
PSEN 1.1-20 1 magnetic Actuator 514 120