00197855-04_JC_PM_WF4_SX12_EN.pdf - 第34页
www.asm-smt.com
8 WF4 SX1/2 Clean the X-Axis loose bearing and contact surface. 1 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C4, C31
www.asm-smt.com
1 Move all gantries to the end limit. 2 Clean the loose bearing at the left side of
the head.
3 Clean the loose bearing at the right side of
the head.
4 Clean the contact surface over the entire
length.
5 Repeat all steps at the other gantry.
www.asm-smt.com
9 WF4 SX1/2 Grease the guide bearing and clean the linear guide and scale of the Y-
Axis.
3 min 1 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T12, T89, T90
Wear Part: Consumables:
C3, C5, C31, C49
www.asm-smt.com
1 Prepare the grease gun, see appendix
[33]
.
2 Move the gantry to a suitable working
area.
3 Position the hose straight onto the outer
grease nipple of the gantry.
4 Squeeze the grease gun one time. 5 Grease emerges at the grease nipple. 6 If NOT go to Step 8.