Besi JTF2 Traystak Feeder.pdf - 第51页

Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series 11/2006 Edition 51 2.10 Retrofit the SIPLACE HF-series / X-series 2.10.1 Work at the location : Dock the…

100%1 / 60
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
50
2.9.2 Working on the component trolley
: Remove the feeder fixing on the component trolley if present.
2.9.3 Software
: Switch on the machine and switch to the SITEST program.
: Deactivate the relevant nozzle changer under Gantries.
2
2
2
2
2
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
51
2.10 Retrofit the SIPLACE HF-series / X-series
2.10.1 Work at the location
: Dock the component trolley out of the placement machine.
: Shut down the placement system and switch it off.
2
: Remove the nozzle reject bin and component reject bin.
: Remove all nozzle changers fitted at this location.
2
If the reject bin sensor option is installed, it must be removed and refitted later. 2
2
: Close the air connections.
: Stow the unused cables in the cable duct.
2
Reject bin sensor
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
52
: Remove the cover plate for the ODU connector by loosening the two screws. The cover plate
can be removed with a light rotary movement forward.
2
: Remove the tape guide channel by loosening these two screws.
2
Inside the machine, the cover plate must be pulled inwards slightly so that the tape guide channel
can be removed. 2
2
Screws
Screws