00196674-01 - VD SetupCenter V3.3_de_en.pdf - 第6页
Table of contents 6 Version Description SIPLACE Setup Center 3.3 6 Restriktionen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 6.1 Einschränkung .... …
Table of contents
Version Description SIPLACE Setup Center 3.3
5
1 Einleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
1.1 Empfehlung ......................................................................................................................................... 36
2 Systemüberblick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3 Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.1 Software-Komponenten und Dokumentation................................................................................... 39
3.2 Sprachen.............................................................................................................................................. 39
4 Systemvoraussetzungen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
4.1 Rechner................................................................................................................................................ 41
4.2 Resourcenbedarf ................................................................................................................................ 42
4.3 Unterstützte Software......................................................................................................................... 43
4.4 Unterstützte Hardware........................................................................................................................ 44
4.5 Geräteerkennung ................................................................................................................................ 45
4.5.1 Maschinen Stellplatz Identifikation (Unique Maschine ID) .................................................................... 45
4.5.2 Wechseltisch Identifikation (Unique Table ID) ...................................................................................... 45
5 Neue Funktionen in Setup Center 3.3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
5.1 Unterstützung neuer Stationstypen .................................................................................................. 47
5.2 Unterstützung neuer Softwareversionen.......................................................................................... 47
5.3 Unterstützung von stationsweisem Download ................................................................................ 47
5.4 Unterstützung von Drittanbieter-Förderern bei der X-Serie ........................................................... 47
5.5 Unterstützung von Gebindeketten aus mehr als 3 Gebinden......................................................... 48
5.6 Spuren sperren anstatt abzurüsten .................................................................................................. 48
5.7 Unterstützung der MAT-Label-Version 2.4 (ZVEI Sepc. V2.4)......................................................... 49
5.8 Unterstützung des 2D-Barcode-Lesers von Datalogic.................................................................... 50
5.9 Füllstand der vorigen Rolle während des Nachfüllens an der Maschine ändern ......................... 50
5.10 Unterstützung von MES Process Interlocking in Setup Center ..................................................... 50
Table of contents
6 Version Description SIPLACE Setup Center 3.3
6 Restriktionen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
6.1 Einschränkung .................................................................................................................................... 51
6.1.1 SIPLACE Pro ........................................................................................................................................ 51
6.1.2 Stations Software .................................................................................................................................. 51
6.1.3 Datenbank Views .................................................................................................................................. 51
6.1.4 Windows Vista / 64 Bit Betriebssysteme............................................................................................... 51
6.1.5 Spleißstellen.......................................................................................................................................... 51
6.1.6 Traceability............................................................................................................................................ 52
6.1.7 Rüstliste ................................................................................................................................................ 52
6.1.8 Recovery Placement ............................................................................................................................. 52
6.1.9 X- und SX Docking Station.................................................................................................................... 52
6.1.10 Mat - Label ............................................................................................................................................ 52
6.2 Bekannte Sachverhalte / Probleme (Allgemein)............................................................................... 53
6.2.1 Update Installation ................................................................................................................................ 53
6.2.2 Rüstverifikation...................................................................................................................................... 53
6.2.3 Teilrüstung ............................................................................................................................................ 53
6.2.4 Mengenverwaltung................................................................................................................................ 53
6.2.5 Förderer ................................................................................................................................................ 53
6.2.6 SIPLACE Pro ........................................................................................................................................ 54
6.2.7 Länge der Rüstungsnamen................................................................................................................... 54
6.2.8 Sonderzeichen ...................................................................................................................................... 54
6.2.9 Docking Station ..................................................................................................................................... 54
6.2.10 Manuelle Barcode-Eingabe................................................................................................................... 54
6.2.11 Mehrere Instanzen von Setup Center ................................................................................................... 55
6.2.12 Barcode Scanner .................................................................................................................................. 55
6.2.13 Betriebsmittelverwaltung ....................................................................................................................... 55
6.2.14 Barcode-Fragment ................................................................................................................................ 55
6.2.15 Verhaltensänderung sperren statt abrüsten.......................................................................................... 55
7 Anhang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
7.1 Normen und Standards ...................................................................................................................... 57
7.2 Informationen zum SIPLACE Setup Center Error Reporting Tool.................................................. 58
8 Abkürzungen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Introduction
Version Description SIPLACE Setup Center 3.3
7
1Introduction
SIPLACE Setup Center is an application for performing setup verification on SIPLACE machines (online)
and in the pre-setup area (offline).
Setup verification is the term used for step-by-step verification of the assignment of a component from
the target setup to a track in the actual setup. SIPLACE Setup Center obtains the data on the target setup
through the SIPLACE Pro Interface (SPI). The component is identified by barcode labels on the
packaging unit, which SIPLACE Setup Center reads by means of a scanner system and processes via
a flexible barcode label definition. The track is then assigned to the component via the track barcode on
the machine or via the component verification button on the X feeder. The data acquired during a setup
verification is stored by SIPLACE Setup Center in a separate database.
SIPLACE Setup Center can currently handle packaging units that are uniquely identifiable and
packaging units that are assigned to a batch. The groups are differentiated by the fact that a packaging
unit has a unique barcode (UID) or a batch identification (ICL), such as a serial number. For technical
reasons, Setup Center cannot provide all functions with the same degree of user-friendliness in ICL
mode, so we recommend equipping packaging units with a unique identification.
SIPLACE Setup Center currently supports online setup verification for all SIPLACE placement machines
(except F3 and S15). SIPLACE Setup Center also differentiates between unforced and forced setup
verification. Unforced setup verification is carried out without a connection to the station. This means
there is no compulsion to perform setup verification and the production process can take place without
it. Forced setup verification is carried out with a connection to the station and requires successful setup
verification before production. This is implemented as follows: once an order or a packaging unit
changeover has been downloaded, the machine deactivates all divisions in which there are packaging
units for which no setup verification data has been received. Before production can start, the line
operator must have therefore successfully verified all components/batches necessary for the product.
Forced online setup verification is not supported by C series machines.
SIPLACE Setup Center also allows you to perform offline setup verification in the pre-setup area. The
offline setup verification is performed for the changeover table of a selected setup. After completing the
setup via the offline setup verification, the changeover table can be moved out of the pre-setup area and
over to the production line, where it can be logged on to the station via the "Changeover table
management". This once again supports all SIPLACE machines.
The concept of device recognition for machines (Unique Machine ID), changeover tables (Unique Table
ID) and feeders (Unique Feeder ID) was introduced with the support of X series machines. The
equipment of the X series supports the concept directly by way of the hardware. For the F, S, H-, HS and
C series the identification labels still need to be ordered, like described below.
In contrast to previous setup verification systems, the SIPLACE Setup Center uses a radio scanner
system, which displays the current setup data for the user. The radio scanner system offers easy-to-
follow user prompts. The four-line display gives the user information and is also used to control certain
processes. The menu structures are modeled on those used for the operation of mobile phones. In
addition, the scanner indicates the successful or unsuccessful completion of actions by various audible
and visual signals.
ATTENTION:
The line ID used in Setup Center 2.0 and 2.1 is no longer supported and is replaced by the
machine ID.
For this reason it is necessary to remove all existing barcode labels for online setup verification,
for example ‚Table Verification’, ,Refill’, ‚Shift Change’, ‚Component Search’ etc. and to
overwrite these with new labels.