00196044-05 - sg x und x4i fse_en.pdf - 第607页

MTC2 Downloadi ng Parameter Sets Masterdrives S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN MTC2 61 1 14.4.5.2 Inst allation Drive Monitor NOTE: The Drive Monitor software can also be used fo r the MT…

100%1 / 632
MTC2
Masterdrives Downloading Parameter Sets
Student Guide (FSE) SIPLACE X Series and X4I
MTC2 Edition 01/2009 EN
610
14.4.5 Downloading Parameter Sets
14.4.5.1 Requirements
CD ROM Drive Monitor
Cables for laptop and master drives (03021720-01)
Parameter set for lifting axis Tower 1 and Tower 2
Parameter set for feed axis Tower 1 and Tower 2
Simovert Masterdrive for the Lifting axis (00354979-01)
Simovert Masterdrive for the Feed axis (00354980-01)
14-66: Cable configuration for the connection between the laptop and the master drive
ATTENTION:
Do not forget the jumper between pin 9 and 1. The switch is not necessary for downloading the
parameter sets.
MTC2
Downloading Parameter Sets Masterdrives
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN MTC2
611
14.4.5.2 Installation Drive Monitor
NOTE:
The
Drive Monitor
software can also be used for the MTC1. The softwareversion on the MTC
1 is 1.5.
Installation can only be carried out with administrator rights.
Prior to installation, it may be necessary to create a directory with the name
Parameter sets
.
14-67: Installation Drive Monitor
X When you insert the CD-ROM , the installation
window will be automatically opened
or start the install.bat file from the Drive
Monitor folder.
X
Installation Drive Monitor
.
X After installation has been completed
successfully, a shortcut appears on the
desktop.
14-68: select language
X Select language (D, E, F, I, S)
X Select
Next
.
X Select
Next
.
X Agree to the software license with
YES
.
MTC2
Masterdrives Downloading Parameter Sets
Student Guide (FSE) SIPLACE X Series and X4I
MTC2 Edition 01/2009 EN
612
14-69: Computer requirements
X Select
Next
.
14-70: User registration
X Select
Next
.
14-71: Select the target drive, on which you wish to install the program.
X Select
Next
.