Nordson_EFD_Centrifuge_Operating_Manual.pdf - 第15页
15 www .nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe +44 (0) 1582 666334 Asia +86 (21) 3866 9006 Sales and service of EFD dispensing systems are available worldwide. Opening Lid Manually – Powe…
14
www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe +44 (0) 1582 666334 Asia +86 (21) 3866 9006
Sales and service of EFD dispensing systems are available worldwide.
Error Codes
Err-1 Rotor is unable to rotate. (Defective drive motor or malfunctioning PCB)
Err-3 An attempt to open LID while rotor is still spinning.
Err-5 Imbalance rotor, related to weight distribution of contents.
Err-8 The set RPM is exceeding the maximum speed for rotor and contents.
WARNING
1. To avoid electrical shock, always disconnect from power supply prior to maintenance & Servicing.
2. Only qualified personnel or licensed engineers should attempt any maintenance or servicing
the PM5000.
3. Always use a properly grounded electrical outlet of correct voltage rating.
4. Inspect centrifuge unit before use of unit to make sure there are no issues before use.
15
www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe +44 (0) 1582 666334 Asia +86 (21) 3866 9006
Sales and service of EFD dispensing systems are available worldwide.
Opening Lid Manually – Power Failure
Note:
In case of power failure, the lid will remain locked as designed. If the lid needs to be open in this
situation manually overriding the safety switch is required.
To manually open lid, kindly use the following procedures:
Steps:
1. Remove the hole plug (white) located on the left hand side of the PM5000 enclosure.
2. Insert a screwdriver or any sturdy object into the hole, and press down onto the magnetic interlock
assembly as shown in step #1. Simultaneously at this time push on Lid-Release-Bar on the right
(#2）to release lid
3. The lid will now open.
Maintenance & Servicing
There are very few serviceable items on the PM5000. Please check with EFD technical Service for
servicing to the ProcessMate PM5000.
Nordson EFD One Year Limited Warranty
This Nordson EFD 7015544 is warranted to the original end user for one year from date of purchase. Within
the period of this warranty, EFD will repair or replace any defective component, or the entire dispenser at
EFD’s option, on authorized return of the part or the complete dispenser, prepaid to the factory.
In no event shall any liability or obligation of EFD arising from this warranty exceed the purchase price of the
equipment. Before using, user shall determine the suitability of the product for its intended use, and user
assumes all risk and liability whatsoever in connection therewith.
EFD makes no warranty whatsoever of merchantability or fitness for a particular purpose. In no event
shall EFD be liable for incidental or consequential damages.
To register your warranty in the USA, please call 800.556.3484 within 30 days, or go to
www.nordsonefd.com/warranty/dispensers/one/.
For Nordson EFD LLC sales and service in over
30 countries, contact Nordson EFD or go to
www.nordsonefd.com
East Providence, RI USA
USA & Canada: 800-556-3484; +1-401-431-7000
info@nordsonefd.com
Dunstable, Bedfordshire, UK
0800 585733; +44 (0) 1582 666334
Ireland 00800 8272 9444
europe@nordsonefd.com
China: +86 (21) 3866 9006
china@nordsonefd.com
Singapore: +65 6796 9522
sin-mal@nordsonefd.com
The Wave Design is a trademark of Nordson Corporation.
©2011 Nordson Corporation 7015542-EN v110811