RDS_Lacktrockner_en.pdf - 第11页
11 Data and facts Detailed information RDS lacquer dryer Dimensions Length: 2400 – 6600 mm depending on the system design Width: 1400 mm Height: 1400 mm Exhaust air Exhaust air volume: up to max. 2000 m³/h Pressure: 5 mb…
Process documentation, traceability, etc.
The variety of MES systems on the market requires individual
adjustment of data transfer from the Rehm drying system
to the client’s superordinate manufacturing management
system (MES). Superordinate to this is the ERP system,
which the whole company keeps an eye on, and which allows
for logistic optimisations across all sites. However, the MES
system focuses on a company’s individual production lines.
Rehm uses an ROI interface (Rehm open interface) to trans-
fer individual data. Machine-specic operational data that is
due for the respective system is collected and passed on to
the MES system as a bundle.
It is possible to ensure the seamless traceability of prod-
ucts, components or batches in this way. A data set is
created for every assembly, which documents the relevant
process parameter during the run. The assembly can be
clearly identied and assigned via a barcode scan on the
assembly itself, or by scanning the batch card. Process
locking is also available as an option. Here, the scan is com-
pared with the database and the assembly is only forwarded
on to the system in the event of approval. Defects can be
detected and prevented in this way and therefore lead to
process improvements.
Manufacturing execution system (MES)
Production control at operational level
Superordinate manufacturing management system for planning
and monitoring production processes
Enterprise resource planning system (ERP)
Rehm open interface (ROI)
Data transmission
Data is transmitted using an interface with the superordinate
manufacturing management system
Line monitoring
Process locking
Control
Comparison of the congured
program with the assembly to
be manufactured
Traceability
Traceability
of all process-relevant data
Company level
Operational data
acquisition
Production monitoring
Recording process-relevant
Data with the system software
Operational level
Stop
If there is no
conformance, an
alarm signal will
sound
Production level
11
Data and facts
Detailed information RDS lacquer dryer
Dimensions
Length: 2400 – 6600 mm
depending on the system design
Width: 1400 mm
Height: 1400 mm
Exhaust air
Exhaust air volume: up to max. 2000 m³/h
Pressure: 5 mbar
Transport
Transport height: 950 mm ± 50 mm
Transport width: 80 – 460 mm
Speed: 30 – 3000 mm/min.
Clearance above/underneath: 100 mm
System Heating zone length
in millimetres
Number of
IR heating zones
Number of
convection zones
Drying time in
minutes
RDS 2400 2400 10 1 2,6 – 24
RDS 3000 3000 12 1 3,3 – 30
RDS 3600 3600 14 1 4,0 – 36
RDS 4200 4200 16 1 4,6 – 42
RDS 4800 4800 18 2 5,3 – 48
RDS 5400 5400 20 2 6,2 – 56
RDS 6000 6000 22 2 6,7 – 64
Modular machine concept
The control elements of the RDS drying system are easily
accessible for minimal maintenance costs. The heating base
of the IR radiator can also be equipped with glass covers to
protect against contamination and for easier cleaning. This
considerably reduces the maintenance required and increases
the service life of the radiators. Here, Rehm relies on tried-
and-tested components from the reflow soldering systems.
Simple maintenance
Optionen
Air or water-cooled cooling unit*
Integrated extraction
Internal temperature monitoring
Throughput monitoring
Uninterruptible power supply
SMEMA and MES interface, Windows-based PC,
traceability tools
* Cooling unit depending on the system type 600 – 1200 mm
low
maintenance
expenses
November 2021. Technical changes without prior notice. Art.-No. 1105970
*1105970*
Rehm Thermal Systems GmbH | Leinenstrasse 7 | 89143 Blaubeuren, Germany
T +49 73 44 - 96 06 0 | F +49 73 44 - 96 06 525 | info@rehm-group.com | www.rehm-group.com
Rehm Worldwide
As a leading manufacturer of innovative thermal system solutions, we have
customers on every continent. With our own locations in Europe,
the Americas and Asia as well as 27 agencies in 24 countries we are in
position to serve the international markets quickly and to offer outstanding
on-site service – worldwide and round the clock!
Headquarters
Rehm Thermal Systems
Technology Center & Production
Blaubeuren, Germany
Rehm Thermal Systems
Technology Center
Guadalajara, Mexico
Rehm Ceská republika
PrÍbor, Czech Republic
Rehm Thermal Systems
Moscow, Russia
Rehm Thermal Systems
Production
Dongguan, China
Rehm Hungária
Szendehely, Hungary
Rehm Thermal Systems
Technology Center
Shanghai, China
Rehm Thermal Systems
Hong Kong, China
Rehm Thermal Systems
Taoyuan City, Taiwan, China
Rehm Thermal Systems
Pathum thani, Thailand
Rehm Thermal Systems
Kyunggi-do, Korea
Location
Production facility
Representation