ASM_Nozzles_EN.pdf - 第38页
1 - 34 www.asm-smt.com Nozzles for vacuum test 1069 (Vectra) L = 9.400 mm Tip: 1.700 x 1.200 mm (LxW) Item no. 03094112 2069 (Vectra) L = 15.000 mm Tip: 1.700 x 1.200 mm (LxW) Item no. 03094135 4069 / 6069 (Vectra) L = 9…
1 - 33
www.asm-smt.com
Special nozzles (examples)
Nozzle SOKO 40xx
Item no. 03146571
Shape: round
Usage:
– Test points Ø 2.0 mm
– LED 1206 with lens
NOTICE!
Nozzles for customized components
Application-optimized nozzles for customized components can be found for all
placement heads using the Component Support Online Help at
www.asm-
smt.com.
If necessary, we can also provide special nozzles for your application.
Please contact your local sales partner or siplace.nozzles.de@asmpt.com
.
1 - 34
www.asm-smt.com
Nozzles for vacuum test
1069 (Vectra)
L = 9.400 mm
Tip: 1.700 x 1.200 mm (LxW)
Item no. 03094112
2069 (Vectra)
L = 15.000 mm
Tip: 1.700 x 1.200 mm (LxW)
Item no. 03094135
4069 / 6069 (Vectra)
L = 9.400 mm
Tip: 1.700 x 1.200 mm (LxW)
Item no. 03106244
1 - 35
www.asm-smt.com
Measuring nozzles for the SIPLACE MeasuringFeederX
Small chip components of the types 0201, 0402, 0603, 0805, 1206, and 1210 can typically not be measured using a
standard nozzle, because their contacts extend to the top side. The available standard nozzles usually have a low resist-
ance. If such a nozzle touches one or both contacts of the component, then a fraction of the measurement current can
flow through the nozzle. This falsifies the measuring result. To avoid this problem, there is a set of special nozzles avail-
able that have tips with very high resistance.
NOTICE
Special measuring nozzles in SIPLACE Pro
The special nozzles for measuring small chip components are not part of the standard nozzle set in SIPLACE Pro.
They need to be defined in the Nozzles Editor. Please read the SIPLACE Pro documentation about how to do this.