00196591-04 UM S-Feeder Test Station EN.pdf - 第9页
Hardware Description Overview of Devices User Manual SIPLACE S-Feeder Test Sta tion 9 2 2 H a r d w a r e D e s c r ip t io n Hardware Description 2.1 2 . 1 O v e r v ie w o f D e v ic e s Overview of Devices 2.2 2 . 2 I…
Introduction
Correct and Incorrect Use
8 User Manual SIPLACE S-Feeder Test Station
1.8
1.8 Correct and Incorrect Use
Correct and Incorrect Use
The checking device may only be used to test and set explicitly approved SIPLACE feeder modules and
may only be operated by specially trained personnel.
Any other use of the checking device is understood to be incorrect and is therefore prohibited.
Hardware Description
Overview of Devices
User Manual SIPLACE S-Feeder Test Station 9
2
2 Hardware Description
Hardware Description
2.1
2.1 Overview of Devices
Overview of Devices
2.2
2.2 Introduction - Location Surface
Introduction - Location Surface
1 Camera tower 6 Connection for feeder modules
2 Connection for device ground 7 Connection for ESD wristband
3 Connection for ESD wristband 8 Connection for power supply
4 Contact surface for feeder modules 9 Serial port for communication
5 ON / OFF switch 10 USB camera cable
CAUTION
Damage of Camera
Always carry the checking device by holding on to it at the left and right of the housing! The
(camera tower) is sensitive and NOT suitable for carrying the checking device.
Hardware Description
Test Tapes for the Different Feeder Types
10 User Manual SIPLACE S-Feeder Test Station
1. Location surface for feeder modules
2. Calotte for positioning and fixing the feeder modules or the calibration standard
3. Magnets for fixing the feeder modules or the calibration standard
4. Centering pin for positioning the feeder modules or the calibration standard
2.3
2.3 Test Tapes for the Different Feeder Types
Test Tapes for the Different Feeder Types
Taste tape (master tape) For feeder type
Master Tape 8mm Feeder [03079307-xx]
without a second row of holes
3 x 8mm SL (shutterless)
3 x 8mm S 0201 / 0402 BE
Master Tape 8mm Feeder [03071549-xx] 2 x 8 mm S
3 x 8 mm S
3 x 8mm (others)
Master Tape 12mm Feeder [03071708-xx] 12/16mm with setting plate
Master Tape 16mm Feeder [03071725-xx] 12/16mm without setting plate
24/32mm
44mm … 88mm