192277 - Micron Technical Reference Volume 1.pdf - 第81页
在线预览 192277 - Micron Technical Reference Volume 1.pdf PDF 文档。
COVERS
PRINTER COVERS
3.38 Technical Reference Manual Chapter Issue 11, Jan 17
Type 5 Covers In order to protect personnel and prevent damage to the printer, four panels are
fitted around the base of the printer.
• Front Panel
• Rear Panel
• Lower Side Panels (2 positions)
The upper part of the printer is protected by the front printhead cover, two front
corner panels, two rear corner panels, a rear upper panel, and a top rear panel.
NOTE
Some of the covers can only be removed in a specific order due to the covers
interlocking with each other.
Item Description Item Description
1 Right Hand Upper Rear Corner Panel 7 Left Hand Side Cover
2 Front Printhead Cover 8 Left Hand Safety Cover
3 Right Hand Upper Front Corner Panel 9 Left Hand Upper Rear Corner Panel
4 Right Hand Safety Cover 10 Lower Rear Panel
5 Right Hand Side Cover 11 Left Hand Upper Front Corner Panel
6 Front Panel 12 Upper Rear Panel
Front Left Quarter View
4
8
6
7
3
5
2
9
10
1
11
12
COVERS
PRINTER COVERS
3.40 Technical Reference Manual Chapter Issue 11, Jan 17
Front Panel To remove the front panel, carry out the following:
1. Open the front printhead cover.
2. Using a 4mm Allen key, undo the two captive screws located on the inside
of the panel.
3. Tilt the top of the panel away from the printer and lift the panel clear of the
location pins that locate the panel to the printer frame, taking care not to
damage the earth cable.
Lower Rear Panel To remove the lower rear panel, carry out the following:
1. Using a 4mm Allen key, undo the four captive screws.
2. Tilt the top of the panel away from the printer and lift the panel clear of the
location pins that locate the panel to the printer frame, taking care not to
damage the earth cable.
M5 Captive
Screws
View on Rear of Machine
M5 Captive
Screws