00198503-02_IM_SIPLACE_Pro_15.1_R18-1_EN.pdf - 第52页

SIPLACE Pro 15.1 (R18 - 1) / Installat ion Manual 05/2018 Edition 52 ► Select the Modify button. ► Click the Next button. The Packages and F eatures dialog is display ed. Figure 8-2: Packages and feature s ► Verify the i…

100%1 / 70
SIPLACE Pro 15.1 (R18-1) / Installation Manual 05/2018 Edition
51
8 Modifying the Installation
The Modify option allows you to change the current installation entries.
NOTICE
You must be logged in as Administrator to change the installation.
8.1 Modifying the SIPLACE Pro Installation
► Log in using an administrative account on the computer.
► Insert the installation media and mount the *.iso file.
► Open Windows Explorer.
► Double-click the BundleInstaller file to modify SIPLACE Pro.
Alternatively, you can start the Modify option as follows:
► Open the Start menu and select Control Panel.
► Select Uninstall a program.
► Click with the right mouse key on the SIPLACE Pro entry in the list of installed programs.
► Select Change from the context menu.
The following dialog is displayed.
Figure 8-1: Modify, repair or remove program
SIPLACE Pro 15.1 (R18-1) / Installation Manual 05/2018 Edition
52
► Select the Modify button.
► Click the Next button.
The Packages and Features dialog is displayed.
Figure 8-2: Packages and features
► Verify the installed features, change the selection as needed and click the Next button.
Unselected features (were installed before) will not be installed.
If you install a local SIPLACE Pro Server, the Configuration of SIPLACE Pro Server dialog is
displayed.
In this dialog is specified under which Windows user account the server component of SIPLACE
Pro runs.
SIPLACE Pro 15.1 (R18-1) / Installation Manual 05/2018 Edition
53
Figure 8-3: Specifying Windows user account
► If applicable, make the desired changes for the account configuration.
► Click the Next button.
NOTICE
Depending on the features you selected at your first installation, the SIPLACE Pro setup
may ask for the name of the SIPLACE Pro Server and / or Line Control Server.
You can find information about these configuration dialogs in section 6.2.1 and section
6.2.2.
In the next dialog, the SIPLACE Pro access rights (SIPLACE Pro Security) are enabled or disabled.