STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第55页
Mon thly Inspe ction Chap ter 5 Multi -Func tional Placer ST M1-S M ain ten an ce Ha nd bo ok 5-4 Inspection and cleaning conveyor sensor Monthly Inspe ction Step 4 . Clea n the s ens or win dow a c ott on swab a nd an u…
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-3
Inspection and cleaning conveyor sensor
Inspection and cleaning conveyor sensor
Tool for Maintenance
Cleaning liquid, ultra-fine fiber cloth, cotton swab
Measures
Step 1.
Move the X Frame to rear by referring to "Backward
movement of the X-frame" on page 1-4.
Step 2.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Step 3.
Check the recognition accuracy of the corresponding
photo sensor as shown in the following figure. (The red
LED is turned on when an object is recognized.)
(Time required: 10min / No. M-2)
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-4
Inspection and cleaning conveyor sensor
Monthly Inspection
Step 4.
Clean the sensor window a cotton swab and an ultra-
fine fiber cloth.
Remove the dust or foreign material on the sensor window using the cotton swab
or ultra-fine fiber cloth
Step 5.
Release the emergency stop as described in "Releasing
'Emergency Stop' mode" on page 1-6 and perform the
operation again.
Caution
When the sensor operates abnormally or has a problem, contact our
C/S company or local agent for adjustment for proper measures
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-5
Checking and cleaning cover cooling fan
Checking and cleaning cover cooling fan
Tool for Maintenance
Vacuum cleaner, screwdriver(+)
Measures
Step 1.
In the case of a label feeder, tape does not have to be
removed.
Caution
When the main switch is turned on, since the cooling fan operates,
user's hand may get injured. Careless touching of the cable, etc.
may cause electric shock. Therefore, special care is need.
Caution
The cooling fan replaement work accomanies a danger.
Therefore, contact out C/S company (STS) or local agent.
(Time required: 10min / No. M-3)