00192328-01.pdf - 第52页

2 Retrofitt. Instruct. RV6-DLM1 Head & Nozzle Chang. RV6 Standard (Optionen) S IPLACE S-25 HM 2.3 Retrofitting Kits, Tool and Documents 02/01 Issue 50  5HWURILWWLQJ.LW V7 RRODQG'RFXPHQW V  &…

100%1 / 86
SIPLACE S-25 HM 2 Retrofitt. Instruct. RV6-DLM1 Head & Nozzle Chang. RV6 Standard (Optionen)
02/01 Issue 2.2 Safety Instructions
49
 'HILQLWLRQV
DANGER
in terms of these instructions means that death, severe bodily injury or considerable material dam-
age WILL occur if the instructions about danger are not followed.
WARNING
in terms of these instructions means that death, severe bodily injury or considerable material dam-
age may occur if the warnings are not heeded.
CAUTION
in terms of these instructions mean that minor bodily injury or material may occur if the cautions
are not heeded.
NOTE
in terms of these instructions is a statement of important information about the product or the
pertinent portion of the instructions to which particular attention is being drawn.
2 Retrofitt. Instruct. RV6-DLM1 Head & Nozzle Chang. RV6 Standard (Optionen) SIPLACE S-25 HM
2.3 Retrofitting Kits, Tool and Documents 02/01 Issue
50
 5HWURILWWLQJ.LWV7RRODQG'RFXPHQWV
 &3KHDG5FRQILJXUDWLRQNLWRSWLRQ,WHPQR
-
Placement head assembly (RV 6-DLM1) Item no. 00354246-01 *)
- 3 Socket hex head cap screws M4 x 16 (to fasten the placement head)
- Head cover (re-use the screws previously removed) Item no. 00329003-01
- 12 Nozzles Item no. 00326123-02
- 12 Nozzles Item no. 00326124-02
- 1 enclosed package/DLM1_S23 Item no. 00345365-03
– 1 Adapter plate, enclosed package S23 Item no. 00354836-01
– 1 Extension hose, vacuum, holding circuit_S23 Item no.00350975-01
– 1 Extension hose, vacuum, placement circuit_S23 Item no.00351031-01
– 1 Extension hose, interrogation, placement circuit_S23 Item no.00351032-01
– 4 Rubber-metal vibration buffers M4,
15x30, 55 Shore D=15/H=30 Item no. 00345010-01
– 2 Velcro-type fastener Item no. 00346483-01
– 4 Cap screw M4x6 DIN6912 Item no. 00095105-01
– 4 Schnorr washer 4.3 V2a HN 160 Item no. 00342876-01
– 1 Conversion Instructions DLM1
Collect & Place Head S23/F5 G+E Item no: 00191684-0
- Retrofitting Instructions SIPLACE S-25 HM
RV6-DLM1 Head & Nozzle Changer RV6 Standard Item no. 00193123-01
*) The 2 wide ribbon cables and the ribbon cable to the illumination board of the RV12-DLM1
head that were de-installed are to be re-used for the RV6-DLM1 head.
 1R]]OHFKDQJHUIRUVHJPHQWUHYROYHUKHDGRSWLRQ,WHPQR
This Option ist necessary for the RV6-DLM1 head (see also NOTE below).
NOTE:
If an MTC is installed
, the nozzle changer RV6 MTC for the 6-segment head is needed.
Proceed for installation, configuration and calibration of the nozzle changer RV6 MTC, as de-
scribed in the "Retrofitting Instructions MTC on S-25 HM", Item no. 00192792-02 (G + E).
SIPLACE S-25 HM 2 Retrofitt. Instruct. RV6-DLM1 Head & Nozzle Chang. RV6 Standard (Optionen)
02/01 Issue 2.3 Retrofitting Kits, Tool and Documents
51
2.3.3 &3KHDG5FRQILJXUDWLRQNLWRSWLRQ,WHPQR00117260-01
Parts analogous to the configuration kit for the 6-segment head (see Section 2.3.1). 2
2.3.4 1R]]OHFKDQJHUIRUVHJPHQWUHYROYHUKHDGRSWLRQ,WHPQR 00116161-02
This nozzle changer ist needed for the 12-segment head (see also NOTE, below).
On this nozzle changer the fiducials for position recognition already exist. 2
NOTE:
If an MTC is installed
, the nozzle changer RV12 MTC for the 12-segment head is needed.
Proceed for installation, configuration and calibration of the nozzle changer RV12 MTC, as de-
scribed in the "Retrofitting Instructions MTC on S-25 HM", Item no. 00192792-02 (G + E). 2
 5HTXLUHG7RROV$X[LOLDU\7HVW(TXLSPHQWHWF
– Set of Allen-type wrenches
– Oblique-nosed cutting pliers
(for removing the cable ties while de-installing the nozzle changer RV12)
– Clean cloth, ethyl alcohol
– Precision calibration case
– Components for precision calibration
- Mapping plate for revolver mapping
- 4 Cable ties (W = 2.4 mm, L = 92 mm) Item no. 00805140-01 per nozzle changer
- 2 Mounting pedestals for cable ties,
adhesive Type Item no. 00318666-01 per nozzle changer
- 1 (if necessary) adhesive label (with text) Item no. 00332920-03 German and English
- 1(if necessary) adhesive label (with text) at request EU languages
- 1 (if necessary) adhesive label:
triangular warning symbol, "Hand injury" Item no. 00335957-01