00192328-01.pdf - 第53页

SIPLACE S-25 HM 2 Retrofitt. Instruct. RV6-DLM1 Head & Nozzle Chang. RV6 Standa rd (Optionen) 02/01 Issue 2.3 Retrofitting Kits, Tool and Documents 51 2.3.3 &3KHDG5F RQILJXUDWLRQNLWRSWLRQ ,WHPQR…

100%1 / 86
2 Retrofitt. Instruct. RV6-DLM1 Head & Nozzle Chang. RV6 Standard (Optionen) SIPLACE S-25 HM
2.3 Retrofitting Kits, Tool and Documents 02/01 Issue
50
 5HWURILWWLQJ.LWV7RRODQG'RFXPHQWV
 &3KHDG5FRQILJXUDWLRQNLWRSWLRQ,WHPQR
-
Placement head assembly (RV 6-DLM1) Item no. 00354246-01 *)
- 3 Socket hex head cap screws M4 x 16 (to fasten the placement head)
- Head cover (re-use the screws previously removed) Item no. 00329003-01
- 12 Nozzles Item no. 00326123-02
- 12 Nozzles Item no. 00326124-02
- 1 enclosed package/DLM1_S23 Item no. 00345365-03
– 1 Adapter plate, enclosed package S23 Item no. 00354836-01
– 1 Extension hose, vacuum, holding circuit_S23 Item no.00350975-01
– 1 Extension hose, vacuum, placement circuit_S23 Item no.00351031-01
– 1 Extension hose, interrogation, placement circuit_S23 Item no.00351032-01
– 4 Rubber-metal vibration buffers M4,
15x30, 55 Shore D=15/H=30 Item no. 00345010-01
– 2 Velcro-type fastener Item no. 00346483-01
– 4 Cap screw M4x6 DIN6912 Item no. 00095105-01
– 4 Schnorr washer 4.3 V2a HN 160 Item no. 00342876-01
– 1 Conversion Instructions DLM1
Collect & Place Head S23/F5 G+E Item no: 00191684-0
- Retrofitting Instructions SIPLACE S-25 HM
RV6-DLM1 Head & Nozzle Changer RV6 Standard Item no. 00193123-01
*) The 2 wide ribbon cables and the ribbon cable to the illumination board of the RV12-DLM1
head that were de-installed are to be re-used for the RV6-DLM1 head.
 1R]]OHFKDQJHUIRUVHJPHQWUHYROYHUKHDGRSWLRQ,WHPQR
This Option ist necessary for the RV6-DLM1 head (see also NOTE below).
NOTE:
If an MTC is installed
, the nozzle changer RV6 MTC for the 6-segment head is needed.
Proceed for installation, configuration and calibration of the nozzle changer RV6 MTC, as de-
scribed in the "Retrofitting Instructions MTC on S-25 HM", Item no. 00192792-02 (G + E).
SIPLACE S-25 HM 2 Retrofitt. Instruct. RV6-DLM1 Head & Nozzle Chang. RV6 Standard (Optionen)
02/01 Issue 2.3 Retrofitting Kits, Tool and Documents
51
2.3.3 &3KHDG5FRQILJXUDWLRQNLWRSWLRQ,WHPQR00117260-01
Parts analogous to the configuration kit for the 6-segment head (see Section 2.3.1). 2
2.3.4 1R]]OHFKDQJHUIRUVHJPHQWUHYROYHUKHDGRSWLRQ,WHPQR 00116161-02
This nozzle changer ist needed for the 12-segment head (see also NOTE, below).
On this nozzle changer the fiducials for position recognition already exist. 2
NOTE:
If an MTC is installed
, the nozzle changer RV12 MTC for the 12-segment head is needed.
Proceed for installation, configuration and calibration of the nozzle changer RV12 MTC, as de-
scribed in the "Retrofitting Instructions MTC on S-25 HM", Item no. 00192792-02 (G + E). 2
 5HTXLUHG7RROV$X[LOLDU\7HVW(TXLSPHQWHWF
– Set of Allen-type wrenches
– Oblique-nosed cutting pliers
(for removing the cable ties while de-installing the nozzle changer RV12)
– Clean cloth, ethyl alcohol
– Precision calibration case
– Components for precision calibration
- Mapping plate for revolver mapping
- 4 Cable ties (W = 2.4 mm, L = 92 mm) Item no. 00805140-01 per nozzle changer
- 2 Mounting pedestals for cable ties,
adhesive Type Item no. 00318666-01 per nozzle changer
- 1 (if necessary) adhesive label (with text) Item no. 00332920-03 German and English
- 1(if necessary) adhesive label (with text) at request EU languages
- 1 (if necessary) adhesive label:
triangular warning symbol, "Hand injury" Item no. 00335957-01
2 Retrofitt. Instruct. RV6-DLM1 Head & Nozzle Chang. RV6 Standard (Optionen) SIPLACE S-25 HM
2.3 Retrofitting Kits, Tool and Documents 02/01 Issue
52
 5HTXLUHG'RFXPHQWV
– Software Version Description for Station V 502.01, Item no. 00192395-01 (G + E)
– Software Guide SITEST V 502.xx, Item no. 00192656-01 (E)
– Software Version Description, LRU V 502.01, Item no. 00192397-01 (G + E)
– For preparing the 6-segment revolver head, modular:
Conversion Instructions DLM1 Collect & Place Head, Item no. 00191684-0 (G + E).
– For Setting the Dynamic:
Setting Instructions for SIPLACE S-25 HM, Item no. 00192192-02 (G + E)
– For nozzle changer RV6 MTC:
Retrofitting Instructions for MTC on S-25 HM, Item no. 00192792-02 (G + E)
NOTE:
These instructions contain the retrofitting of the nozzle changer RV6 Standard (for 6-segment re-
volver head DLM1) -> see Section 2.4.5.