00196429-0102 - AI Head Reconfiguration Kit SX12 C&P20A_de_en.pdf - 第63页

Backpage

Installing the C&P20A Placement Head

Installation and Removal of Options Option Nozzle Changer

62 Assembly Instructions / Montageanleitung Head Reconfiguration Kit C&P20A

Installation and Removal of Options

3.5 Installation and Removal of Options

Option Nozzle Changer

3.5.1 Option Nozzle Changer

► When replacing the TwinHead by a C&P20A/CPP head the nozzle changer of the TwinHead must

be replaced by the appropriate nozzle changer for the C&P20A/CPP head.

► For installing and removing the nozzle changer please refer to the Assemby Instruction "Nozzle

Changer SX1/2" [00196432-xx].

Option Verify Reject Bin

3.5.2 Option Verify Reject Bin

► For installing and removing the option Verify component reject bin please refer to the Assembly In-

structions "Reject Bin SX1/2" [00196615-xx].

Final Work

3.6 Final Work

► Switch the placement machine on at the main switch.

The head exchange will be indicated after the startup of the machine.

► Confirm the new configuration.

► Check the firmware version for the placement head and the HCU and perform a download, if needed.

► Apply the data (zero point correction star and Z axis) from the placement head.

► If the placement head is installed on a machine for the first time, it does not contain any calibration

data.

► Calibrate the placement head.

If the placement head has already been used on another machine, you can use the calibration data

from the memory of the placement head.

► Measure the nozzle changers and, if necessary, the stationary camera.

► Perform the mapping procedure if necessary.

► Perform another restart.

The conversion is completed with that.

CAUTION

Crash danger

Operate a placement head with its appropriate nozzle changer only. There is crash danger

when using a wrong nozzle changer.

NOTICE

If a second nozzle changer row is retrofitted, it may be necessary to loosen the COT insert and

move it outwards. Read the applicable service manual for this. After completion of work, this

needs to be fixed into place again and all attached parts (nozzle changer) must be remeasured.

Backpage

Item no.: 00196429-0102 ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany