03253524-01 KPO 2 Closed Loop.pdf - 第4页

4 Standalone Manual Interface To Koh Young KPO 2 08/2021 TABLE OF CONTENTS

3Standalone Manual Interface To Koh Young KPO 2 08/2021

TABLE OF CONTENTS

1 MANUAL INFORMATION 5

1.1 MANUAL SCOPE 5

1.2 MANUAL CHANGE REQUEST 5

2 INSTALLATION 7

2.1 DEFINITIONS 7

2.2 SCOPE 7

2.3 INTRODUCTION 7

2.4 PRINTER SYSTEM REQUIREMENTS 8

2.5 PREPARATION 9

2.5.1 Networking 9

2.5.2 RTX Key 9

2.5.3 Barcode Reader 9

2.6 NETWORK SETUP 9

2.6.1 Set Printer IP Address 9

2.6.2 Disable Printer Firewall 12

2.6.3 Set Printer IP Address On SPI 14

2.6.4 Confirmation Of Network Connection 14

2.7 PRINTER SOFTWARE SETUP 14

3 USER INFORMATION 15

3.1 PRINTER AND PROCESS PRE-REQUISITES 15

3.2 ASM RECOMMENDED TRAINING 15

3.3 GETTING STARTED 16

3.3.1 Running A KPO DOE 17

3.3.2 KPO Monitor 18

3.3.3 KPO Logs 19

3.3.3.1 Log Examples 19

3.4 TROUBLE SHOOTING AND ESCALATION 21

3.4.1 Appendix A - Printer Preparation 22

3.4.2 Appendix B - Production Data Record 23

4 Standalone Manual Interface To Koh Young KPO 2 08/2021

TABLE OF CONTENTS

1 MANUAL INFORMATION

1.1 MANUAL SCOPE

Standalone Manual Interface To Koh Young KPO 2 08/2021 5

1 MANUAL INFORMATION

1.1 MANUAL SCOPE

This manual is a complementary supplement to your machine’s documentation. It provides tech-

nical, operating and safety information with advice relevant to its subject. For information regarding

general and specific machine technical, operating and safety information, refer to the relevant

machine documentation.

1.2 MANUAL CHANGE REQUEST

Information in this manual is subject to change without notice.

No part of this manual may be reproduced, transmitted in any form or means, electronically or

mechanically, including photocopying and recording, for any purpose without the express written

permission of ASM Assembly Systems Singapore Pte Ltd.

Every effort has been made during the composition of this manual to ensure that the information

has been clearly presented and correct in all respects.

If during the use of this manual, errors or omissions are found, or the reader considers that im-

provements are necessary to overcome any ambiguity or inaccuracies, a copy of the manual

change request form (see overleaf) should be completed and either faxed or forwarded to the ad-

dress below, accompanied with a copy of the relevant page and/or figure of the manual with the re-

commendation.

Quality Manager

ASM Assembly Systems Weymouth Ltd

11 Albany Road

Granby Industrial Estate

Weymouth

Dorset

DT4 9TH

England

Tel: +44 1305 760760

Fax: +44 1305 760123