CP43操作手册.pdf.pdf - 第324页
Chapter 4 V ision Processing Errors Part 6 4.4 V ision Processing System Errors Error Code 1C420002 Cause: A command in the vision processing system is incorr ect. Remedy: If this error occurs contact Fuji. Error Code 1C…
Chapter 4 Vision Processing ErrorsPart 6
Error Code 1C410129
Cause: Training cannot be carried out because the coarse edge is not
correct.
Remedy: Check the generic device description.
Error Code 1C410130
Cause: The coarse edge pickup tolerance is too large.
Remedy: Decrease the tolerance in the generic device description (refer to
‘total tolerance x,’ ‘total tolerance y’ and ‘rotation tolerance’).
Error Code 1C410131
Cause: The coarse edge pickup tolerance is too large.
Remedy: Decrease the tolerance in the generic device description (refer to
‘total tolerance x,’ ‘total tolerance y’ and ‘rotation tolerance’).
Error Code 1C410132
Cause: The blob cannot be seen from the nozzle position.
Error Code 1C410133
Cause: Blob inspection error due to faulty device rotation angle setting.
Error Code 1C410134
Cause: There is insufficient data in the generic device description.
Remedy: Check the generic device description. This error should never
occur.
Error Code 1C410143
Cause: Caliper window does not fit correctly.
Remedy: Decrease the tolerance in the generic device description (refer to
‘total tolerance x,’ ‘total tolerance y’ and ‘rotation tolerance’).
6 – 23Version 2.0
Chapter 4 Vision Processing ErrorsPart 6
4.4 Vision Processing System Errors
Error Code 1C420002
Cause: A command in the vision processing system is incorrect.
Remedy: If this error occurs contact Fuji.
Error Code 1C420004
Cause: A command in the vision processing system is incorrect.
Remedy: If this error occurs contact Fuji.
Error Code 1C420007
Cause: A command in the vision processing system is incorrect.
Remedy: If this error occurs contact Fuji.
Error Code 1C420009
Cause: There is a communication error with the vision processing
system.
Remedy: If this error occurs contact Fuji.
Error Code 1C420010 ~ 1C420013
Cause: A command in the vision processing system is incorrect.
Remedy: If this error occurs contact Fuji.
Error Code 1C420014
Cause: There is a communication error with the vision processing
system.
Remedy: If this error occurs contact Fuji.
Error Code 1C420015
Cause: An error occurred during file forwarding. It is possible that the
system program or the data could be damaged.
Remedy: If this error occurs contact Fuji.
6 – 24Version 2.0
Chapter 4 Vision Processing ErrorsPart 6
Error Code 1C420016
Cause: The version of the system program is wrong. There is a problem
with the way the program was upgraded.
Remedy: If this error occurs contact Fuji.
Error Code 1C420018
Cause: There is a communication error with the vision processing
system.
Remedy: If this error occurs contact Fuji.
Error Code 1C420019
Cause: There is a communication error with the vision processing
system.
Remedy: If this error occurs contact Fuji.
6 – 25Version 2.0