00192156-04.pdf - 第37页
Maintenance Inst ructions F Maintenance 03/2003 US Edition 7 Monthly maintenance work 37 a Use a lens cleaning cloth to clean the glass d isk of th e turning station s canning unit. 7 s Remove the 12 valve p lungers . d …
Maintenance Maintenance Instructions F
7 Monthly maintenance work 03/2003 US Edition
36
7
Maintenance Instructions F Maintenance
03/2003 US Edition 7 Monthly maintenance work
37
a Use a lens cleaning cloth to clean the glass disk of the turning station scanning unit.
7
s Remove the 12 valve plungers.
d Clean the valve casings using a cottonwool bud moistened with ethyl alcohol.
Never use pipe-cleaners or bottle brushes to clean the valve casing.
This could tear out the sleeve retaining springs or leave lint or hairs in the segment which, in turn,
could cause faults. 7
7
: Insert the cleaned and very lightly greased valve plungers into the valve casing.
See section ("Maintain the valve plungers").
7
: Move them backwards and forwards several times.
: If the valve plungers move very easily, replace them with new plungers.
If they do move very easily, they are not guaranteed to work correctly. 7
7
: Insert the cleaned sleeves into the segments.
See section ("Maintain the sleeves").
Use only gentle pressure to latch the sleeves into position so as not to damage the sleeve retain-
ing springs. 7
7
7
: Check that the sleeve can be moved easily in the segment.
If the sleeve does not move easily: 7
: Remove the sleeve once more.
f Clean the segment using a cottonwool bud moistened with ethyl alcohol.
7
Never use pipe-cleaners or bottle brushes to clean the segment.
This could tear out the sleeve retaining springs or leave lint or hairs in the segment which, in turn,
could cause faults. 7
7
: Use the "Single Functions" menu to pick up the nozzles of the Collect&Place head.
Maintenance Maintenance Instructions F
7 Monthly maintenance work 03/2003 US Edition
38
7