ASM-SX-V3-设备性能参数-DMS.pdf - 第27页

27 Component feeding Component trolley Component trolley SIPLACE SX The SIPLACE SX compo- nent trolleys are indep endent and easily m aneuverab le modules. The SIPLACE SX machines c an accomm odate two component trolleys…

Smart Pin Support

The Smart Pin Support

option automatically places

support pins on the lifting

table. A gripper unit is used

to take the support pins out of

the smart pin magazine and

place them in the predefined

positions.

Before a Smart Support pin

is placed, the position is

cleaned of any contaminants

with a gentle blast of air. In

addition, the correct position-

ing of the support pin is

checked after its placement,

with the PCB camera.

Smart pin magazine

There are two different mag-

azines available for auto-

matic changeover of max. 10

support pins in the various

machine configurations.

These magazines are fixed

to a magazine holder and are

fitted to the COT insert.

Programming

The positions of the support

pins in the machine can be

defined for each board side,

in the SIPLACE Pro Board

Editor.

A 3D image of the board and

the support pins allows you

to recognize and prevent any

collision risks between the

support pin and the compo-

nents, even for stepped

transportation of boards with

excess length.

Gripper unit

Support pin

Magazine L 10

Magazine Q 10

Component feeding

Component trolley

SIPLACE SX

The SIPLACE SX compo-

nent trolleys are independent

and easily maneuverable

modules. The SIPLACE SX

machines can accommodate

two component trolleys, each

with 60 tracks. If a WPC5/

WPC6 is set up at one of the

locations, the other location

can accommodate a compo-

nent trolley with 30 tracks.

The tape reels are taken up

into the tape container of the

component trolley. A cutting

device on the machine auto-

matically cuts up the used

tape material. The compo-

nent trolleys can be set up

directly on the machine or at

an external setup area with

feeder modules. The benefits

of offline setup are that the

configurations can be pre-

pared without stopping the

line.

This allows the setup change

to be realized very quickly,

using the changeover table

principle, to rapidly change

the component trolleys.

The SIPLACE SX compo-

nent trolleys also support fast

setting up and tearing down

of feeder modules even

during the placement pro-

cess. Tapes can be spliced

without stopping the

machine.

For safety reasons, unoccu-

pied locations are fitted with

so-called dummy feeder

modules.

Component trolley SIPLACE SX

Tape container

Waste container for remaining

empty tape

Changeover table

Component supply Tracks occupied

2 component trolleys with tape reel holder and integral waste

bins

When using a Waffle Pack Changer:

120 locations for feeder modules,

each 8 mm.

90 locations for feeder modules,

each 8 mm.

Tape reel diameter

Standard

Maximum

To 432 mm (17")

483 mm (19")

Component trolley changeover time < 1 minute

Feeder module types Tape feeder modules, reject conveyor, stick

magazine and label presenter.

Component feeding

SIPLACE SmartFeeder X / Xi

SIPLACE SmartFeeder X/Xi

are intelligent tape feeder

modules for flexible produc-

tion environments, which

simplify upgrading and con-

version tasks considerably.

Since all SIPLACE Smart-

Feeder X/Xi support tape

splicing as a standard, this

prevents machine stoppages

when refilling.

The benefits at a glance:

Conversion-friendly

• Omega profiles on the

tape feeder module and

table facilitate safe and

reliable upgrading and

conversion of tape feeder

modules during ongoing

production.

Robust

• Brushless motors extend

the service life of the

SIPLACE SmartFeeder X/

Xi.

Intelligent

• A unique ID ensures a pre-

cise assignment of the

component to the

SIPLACE SmartFeeder X/

Xi. This makes reliable

setup verification very sim-

ple.

• Component pitch, feeder

speed and other functions

are automatically set

when the setup program is

downloaded.

High feeding accuracy

• Closed loop control path

measurement ensures

highly accurate compo-

nent feeding, even for

0201 (metric) placements

with standard feeders.

Operator-friendly

• Contactless data and

power transmission make

it easier to attach/remove

the SIPLACE SmartFeed-

er X/Xi

• A multicolor status display

signals the operating sta-

tuses of the SIPLACE

SmartFeeder X/Xi.

Technical data

SIPLACE SmartFeeder X / Xi

L x H

[mm]

Width

[mm]

Loca-

tion

Transport

increment

[mm]

Max. tape

height

[mm]

SIPLACE SmartFeeder 4 mm Xi 587x200 10,8 1 1 1,1

SIPLACE SmartFeeder 8 mm Xi 587x200 10,8 1 1/2/4/8 3,5

SIPLACE SmartFeeder 2x8 mm Xi 587x200 22,9 2 1/2/4/8 3,5

SIPLACE SmartFeeder 12 mm X 587x200 22,6 2 4 - 16

SIPLACE SmartFeeder 16 mm X 587x200 22,6 2 4 - 20

SIPLACE SmartFeeder 24 mm X 587x200 34,4 3 4 - 32

SIPLACE SmartFeeder 32 mm X 587x200 46,2 4 4 - 40

SIPLACE SmartFeeder 44 mm X 587x200 58,0 5 4 - 52

SIPLACE SmartFeeder 56 mm X 587x200 69,8 6 4 - 64

SIPLACE SmartFeeder 72 mm X 587x200 81,6 7 4 - 80

SIPLACE SmartFeeder 88 mm X 587x200 105,2 9 4 - 96

SIPLACE SmartFeeder 104 mm X 587x200 128,9 11 4 - 96

Tape reels 178 to 483 mm in diameter (7" - 19")

Changeover time ≤ 8 s

a) In 4mm steps

b) For 8 mm paper tapes, the paper thickness must not exceed 1.6 mm. The length of a component pocket

in the direction of tape travel may not exceed 51 mm.