202401051124372976.pdf - 第13页
13 V_SC_5109NC_202104 GENERAL SAFETY W ARNING OF ELECTRIC TOOL: Read all safety warnings, instructions, diagrams and regulations pro vided with the electric tool. F ailure to follow the instructions listed below ma y res…
12 51091C/51090C
废弃电池包的处理
为保护自然环境，请妥善回收或处理电
池包。该电池包含有锂电池。请向当地
废物处理部门咨询有关回收和（/ 或）
处理的信息。通过使用手电钻把电池包
电量耗尽，卸下电池包，用结实的胶带
包裹好极片端口，避免短路和漏电。请
勿试图打开或拆取任何部件。
环境保护
处理废弃物
为了响应环保，对于坏损的机器、配
件及包装材料必须详细加以分类处理，
以便利于回收。
为方便分类回收，各塑胶部位都做有
材料标识。
13
V_SC_5109NC_202104
GENERAL SAFETY WARNING OF ELECTRIC
TOOL:
Read all safety warnings, instructions,
diagrams and regulations provided with the
electric tool.
Failure to follow the instructions
listed below may result in electric shock, fire and/or
serious injury.
Keep all warnings and instruction for review.
"Electric tool" in the warnings refers to the electric
tool driven by mains supply (wired) or the battery
(wireless).
a) Workplace safety
1) Keep the work area clean and bright.
Disordered and dark site may cause
accidents.
2) Do not operate the electric tool in the
explosive environment such as the
flammable liquid, gas or dust. The spark
generated by the electric tool will ignite
the dust or gas.
3) Keep away from children and bystanders
when operating the electric tool.
Inattention may cause you to lose control
of tool.
b) Electrical Safety
1) Plug of electric tool shall be supported
by the socket. Never modify the plug
in any way. Any change-over plug
shall not be used for the electric tool
to be grounded. Unmodified plug and
corresponding socket will reduce the risk
of electric shock.
2) Do not contact the grounded surface
such as the pipe, cooling fin and
refrigerator. If your body is grounded,
the risk of electric shock will increase.
3) Do not expose the electric tool to the
rain or moisture. Water entering the
electric tool will increase the risk of
electric shock.
4) Do not abuse the cord. Never carry,
pull the electric tool with cord or pull
out its plug. Keep the cord away from
heat source, oil, sharp edges or moving
parts. Damaged or entangled cords may
increase the risk of electric shock.
5) For the outdoor application, an extension
cord for outdoor use shall be used. A
cord suitable for outdoor will reduce the
risk of electric shock.
6) If it is in
evitable to operate the electric
tool in the humid conditions, the residual
current device (RCD) shall be used. RCD
is able to reduce the risk of electric
shock.
Note: "residual current device (RCD)". may be
replaced by the "ground fault circuit
interrupter (GFCI)" or "earth leakage
circuit breaker (ELCB)".
c) Personal safety
1) Keep alert and awake when operating
the electric tool. Do not operate the
electric tool when you are tired or have
medication, alcohol or a therapeutic
response. Instantaneous negligence in
the operation of electric tool may result
in serious personal injury.
2) Wear the personal protective equipment.
Always wear the goggles. Protective
devices, such as the dust mask, anti-slip
safety shoes, helmet, listening protection,
etc., are able to reduce the personal
injury.
3) Prevent the accidental starting. Make
sure that the switch is turned off when
connecting the power supply and/or
battery box, picking up or carrying the
WARNING
14
51091C/51090C
tool. Putting the finger on the switch or
powering on when the switch is turned
on may result in the danger.
4) Remove all adjustment keys or wrenches
before turning on the electric tool. A
wrench or key left on the rotating part
of electric tool may cause the personal
injury.
5) Do not stretch your hands excessively.
Always pay attention to the foothold and
body balance. This provides excellent
control of electric tool in unexpected
situations.
6) Dress properly. Do not wear loose
clothing or jewelry. Keep your hair and
clothes away from moving parts. Loose
clothes, accessories or long hair may get
caught in moving parts.
7) If a device for connecting the chip
conveyor and dust collector is provided,
make sure that they are connected well
and used properly. Dust collector is able
to reduce the risk of dust.
8) Don't take it lightly because of the
familiarity of tool, and ignore the safety
guidelines of tool. A careless action may
cause the serious injury in an instant.
d) Use and precautions of electric tool
1) Do not use the improper electric tool
and select the appropriate electric tool
according to the application. The electric
tool appropriately designed according to
the rated value will make your work more
efficient and safer.
2) The electric tool shall not be used if
the switch is unable to turn on/off the
power. Electric tools that cannot be
controlled with switches are dangerous
and shall be repaired.
3) Before making any adjustments,
replacing the accessories or storing
the electric tool, remove the plug from
the power supply and/or disengage the
battery box (if possible). This protective
safety measure reduces the risk of
accidental starting of the electric tool.
4) Place the unused electric tool outside
the reach of children, and do not let the
electric tool operated by the people
who are not familiar with the electric
tool or who do not understand these
instructions. The electric tool is a
potential threat in the hands of untrained
users.
5) Maintenance of electric tool and its
accessories Check whether the moving
parts are in place or stuck, check the
parts for damage and other conditions
that affect the operation of electric
tool. The damaged electric tool shall be
repaired before use. Many accidents are
caused by poorly maintained electric
tools.
6) Keep the cutting tool sharp and clean.
Well-maintained tools with sharp cutting
edges are not easy to get stuck and easy
to control.
7) Use the electric tool, accessories,
cutter bit, etc. in accordance with the
instructions, taking into account the
operating conditions and works to be
performed. Applying the electric tool for
operations that do not match the purpose
may be dangerous.
8) Keep the handle and grip surface dry
and clean and free from grease. In case
of accident, the slippery handle can not
guarantee the griping safety and the
control of tool.