202401051124372976.pdf - 第14页

14 51091C/51090C tool. Putting the finger on the switch or powering on when the s witch is turned on may result in the danger. 4) Remo v e a ll ad justm en t k eys o r wrenc he s before turning on the electric tool. A wr…

V_SC_5109NC_202104

GENERAL SAFETY WARNING OF ELECTRIC

TOOL:

Read all safety warnings, instructions,

diagrams and regulations provided with the

electric tool.

Failure to follow the instructions

listed below may result in electric shock, fire and/or

serious injury.

Keep all warnings and instruction for review.

"Electric tool" in the warnings refers to the electric

tool driven by mains supply (wired) or the battery

(wireless).

a) Workplace safety

1) Keep the work area clean and bright.

Disordered and dark site may cause

accidents.

2) Do not operate the electric tool in the

explosive environment such as the

flammable liquid, gas or dust. The spark

generated by the electric tool will ignite

the dust or gas.

3) Keep away from children and bystanders

when operating the electric tool.

Inattention may cause you to lose control

of tool.

b) Electrical Safety

1) Plug of electric tool shall be supported

by the socket. Never modify the plug

in any way. Any change-over plug

shall not be used for the electric tool

to be grounded. Unmodified plug and

corresponding socket will reduce the risk

of electric shock.

2) Do not contact the grounded surface

such as the pipe, cooling fin and

refrigerator. If your body is grounded,

the risk of electric shock will increase.

3) Do not expose the electric tool to the

rain or moisture. Water entering the

electric tool will increase the risk of

electric shock.

4) Do not abuse the cord. Never carry,

pull the electric tool with cord or pull

out its plug. Keep the cord away from

heat source, oil, sharp edges or moving

parts. Damaged or entangled cords may

increase the risk of electric shock.

5) For the outdoor application, an extension

cord for outdoor use shall be used. A

cord suitable for outdoor will reduce the

risk of electric shock.

6) If it is in

evitable to operate the electric

tool in the humid conditions, the residual

current device (RCD) shall be used. RCD

is able to reduce the risk of electric

shock.

Note: "residual current device (RCD)". may be

replaced by the "ground fault circuit

interrupter (GFCI)" or "earth leakage

circuit breaker (ELCB)".

c) Personal safety

1) Keep alert and awake when operating

the electric tool. Do not operate the

electric tool when you are tired or have

medication, alcohol or a therapeutic

response. Instantaneous negligence in

the operation of electric tool may result

in serious personal injury.

2) Wear the personal protective equipment.

Always wear the goggles. Protective

devices, such as the dust mask, anti-slip

safety shoes, helmet, listening protection,

etc., are able to reduce the personal

injury.

3) Prevent the accidental starting. Make

sure that the switch is turned off when

connecting the power supply and/or

battery box, picking up or carrying the

WARNING

51091C/51090C

tool. Putting the finger on the switch or

powering on when the switch is turned

on may result in the danger.

4) Remove all adjustment keys or wrenches

before turning on the electric tool. A

wrench or key left on the rotating part

of electric tool may cause the personal

injury.

5) Do not stretch your hands excessively.

Always pay attention to the foothold and

body balance. This provides excellent

control of electric tool in unexpected

situations.

6) Dress properly. Do not wear loose

clothing or jewelry. Keep your hair and

clothes away from moving parts. Loose

clothes, accessories or long hair may get

caught in moving parts.

7) If a device for connecting the chip

conveyor and dust collector is provided,

make sure that they are connected well

and used properly. Dust collector is able

to reduce the risk of dust.

8) Don't take it lightly because of the

familiarity of tool, and ignore the safety

guidelines of tool. A careless action may

cause the serious injury in an instant.

d) Use and precautions of electric tool

1) Do not use the improper electric tool

and select the appropriate electric tool

according to the application. The electric

tool appropriately designed according to

the rated value will make your work more

efficient and safer.

2) The electric tool shall not be used if

the switch is unable to turn on/off the

power. Electric tools that cannot be

controlled with switches are dangerous

and shall be repaired.

3) Before making any adjustments,

replacing the accessories or storing

the electric tool, remove the plug from

the power supply and/or disengage the

battery box (if possible). This protective

safety measure reduces the risk of

accidental starting of the electric tool.

4) Place the unused electric tool outside

the reach of children, and do not let the

electric tool operated by the people

who are not familiar with the electric

tool or who do not understand these

instructions. The electric tool is a

potential threat in the hands of untrained

users.

5) Maintenance of electric tool and its

accessories Check whether the moving

parts are in place or stuck, check the

parts for damage and other conditions

that affect the operation of electric

tool. The damaged electric tool shall be

repaired before use. Many accidents are

caused by poorly maintained electric

tools.

6) Keep the cutting tool sharp and clean.

Well-maintained tools with sharp cutting

edges are not easy to get stuck and easy

to control.

7) Use the electric tool, accessories,

cutter bit, etc. in accordance with the

instructions, taking into account the

operating conditions and works to be

performed. Applying the electric tool for

operations that do not match the purpose

may be dangerous.

8) Keep the handle and grip surface dry

and clean and free from grease. In case

of accident, the slippery handle can not

guarantee the griping safety and the

control of tool.

V_SC_5109NC_202104

e) Use and precautions of battery tool

1) Charge the battery only with the

charger specified by the manufacturer.

Unmatched charger and battery pack

may cause the risk of fire.

2) Use the electric tool only if a dedicated

battery pack is provided. Unmatched

battery pack may cause the risk of

damage and fire.

3) When the battery pack is not in use,

keep it away from other metal objects,

such as the clip, coin, key, nail, screw or

others, to prevent one end from being

connected to the other end. A short

circuit at the end of battery may cause a

fire.

4) The abuse will make the liquid splash out

of the battery. Therefore, the exposure

shall be avoided. In case of accidental

exposure, rinse it with water. In case of

splash into the eye, seek the medical

assistance. Liquid spilled from the battery

may cause the corrosion or burning.

5) Do not use damaged or modified

battery packs or tools. Damaged or

modified battery packs may present the

unpredictable results, causing the fire,

explosion or injury.

6) Do not expose the battery pack to fire or

heat. Battery pack exposed to fire or high

temperatures above 130 °C may cause an

explosion.

f) Repair

1) Have the qualified maintenance

personnel to repair the electric tool with

the same spare parts. This will ensure

the safety of the electric tool being

repaired.

2) Never repair a damaged battery pack.

The battery pack can only be repaired

by the manufacturer or an authorized

service provider.

SAFETY WARNING OF DRILL:

If the drilling accessories may touch the concealed

wire or its own wire, hold the tool at the insulating

grip surface. The drilling accessories touching the

live wire may cause the exposed metal parts of tool

to be electrified to shock the operator.