00196613-0102_AI_LP-Dicke6mmDE+EN.pdf - 第15页
6 mm PCB thickness 2 Assembly instructio ns: 6 mm PCB thickness SIPLACE SX1 / SX2 06/2009 Edition 15 2 Assembly instructions: 6 mm PCB thickness SIPLACE SX1 / SX2 2.1 General The installation kit is designed fo r a singl…
1 Montageanleitung LP-Dicke 6 mm SIPLACE SX1 / SX2 LP-Dicke 6 mm
Ausgabe 06/2009
14
: Montieren Sie alle Klemmleisten und Stopper.
1
Drücken Sie beim Festschrauben die Transportwangen nach außen (an die Anlagekante). 1
1
1
: Messen Sie erneut die Höhe des Transportes an mindestens 4 Stellen wie im Bild auf Seite 9
dargestellt. Diese muss wieder 176,8 +/-0,2 mm betragen.
1
Die Höhe muss genau eingehalten werden, sonst besteht Crash-Gefahr. 1
1
1
: Sofern noch nicht geschehen, sollten Sie nun den Optionalen Stopper montieren. Lesen Sie
hierzu die Montageanleitung Optionaler Stopper SIPLACE SX1/SX2 (Art.Nr.: 00196449-xx).
1
1
6 mm PCB thickness 2 Assembly instructions: 6 mm PCB thickness SIPLACE SX1 / SX2
06/2009 Edition
15
2 Assembly instructions:
6 mm PCB thickness
SIPLACE SX1 / SX2
2.1 General
The installation kit is designed for a single conveyor lane.
If you have a dual conveyor, you will have to order this option twice. 2
The installation kit contains optional stoppers. You will need these because printed circuit boards
that are between 0.5 mm and 2.5 mm thick can no longer be stopped reliably with the standard
stopper. You will find more details about installing the optional stoppers in the 00196449 Assembly
Instructions: Optional Stopper. 2
It will take approximately 30 minutes to fit the additional spacers. You will find the time needed to
fit the additional stoppers in the associated instructions. 2
2.2 Restrictions
If the PCB were stopped with the standard stopper, then the minimum thickness of 2.5 mm would
be correct. 2
If the PCB is stopped with the optional stopper, there is no restriction in terms of the minimum
thickness. 2
After conversion, the standard stopper can only stop PCB thicknesses of 2.5 mm to 6 mm. 2
The optional stopper can be used to stop PCBs that are from 0.5 to 6 mm thick. 2
2
2
2
2 Assembly instructions: 6 mm PCB thickness SIPLACE SX1 / SX2 6 mm PCB thickness
06/2009 Edition
16
2.3 Parts required
2.3.1 Assembly kit
2
2.3.2 Tools required
– Set of hexagon socket spanners
– Set of diagonal cutters
– Phillips screwdriver, size 2
– Depth gauge, 200 mm (item no: 03079617-xx)
2
2.3.3 Consumables required
– Cable ties
– Ethyl alcohol
2
2
PCB thickness SIPLACE SX option Item no.: 00519870-xx
1 Spacer bar 519, thickness 2 mm Item no.: 03073321-xx
1 Spacer bar 460, thickness 2 mm Item no.: 03073320-xx
3 Spacer bar 29, thickness 2 mm Item no.: 03073350-xx
1 Stopper option B2_1 Item no.: 03073472-xx
1 Assembly instructions: SIPLACE SX1/SX2 optional stopper Item no.: 00196449-xx
1 Assembly instructions: SIPLACE SX1/SX2 6 mm PCB thickness Item no.: 00196613-xx