DS-Cerno 508.1-NordsonASYMTEK-English.pdf - 第3页

Cerno 508.1 Specica tions F acilities Requirement s System footprint 508.1 S 1700 x 1700 mm (66.9 x 66.9 in.) 508.1 T wo-Segment 2020 x 1750 mm (79.5 x 68.9 in.) Compressed air 6 bar (90 psi) min., 8 b ar (110 psi) max.…

100%1 / 5
Cerno 508.1
Motion System
Z accuracy ±100 μm (0.004 in.)
Z repeatability
(1)
±50 μm (0.002 in.), 3 sigma
Z velocity 0.05 m/s peak (2 in./s)
X-Y accuracy ±100 μm (0.004 in.)
X-Y repeatability
(1)
±50 μm (0.002 in.), 3 sigma
X-Y velocity 0.2 m/s peak (8 in./s)
Computer
PC with Windows
®
operating system
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Soware
PhotoScan “point-and-click” programming editor and machine control software
Solder Pot
Capacity and
Weight
Capacity
(2)
Approx. 12.0 kg (26.4 lbs.)
Total weight of tin-lead solder, solder pot,
and pump assembly
(2)
Approx. 22.4 kg (49.2 lbs.)
Total weight of lead-free solder, solder pot,
and pump assembly
(2)
Approx. 19.7 kg (43.3 lbs.)
Max. temperature: 320°C
Solderable Area
(X-Y)
Single, parallel or double operating mode
(3, 4)
508.1 S: Max. 508 x 508 mm (20.0 x 20.0 in.)
508.1 Two-Segment: Max. 700 x 508 mm (27.6 x 20.0 in.)
Preheating
508.1 S Selectable topside preheating from 1.5 to 6 KW
Selectable bottom preheating from 1.5 to 6 KW
508.1 Two-Segment Selectable topside preheating from 1.5 to 6 KW
Selectable bottom preheating from 1.5 to 12 KW
Board Handling
Capability
508.1 S
(3, 4)
Max. board size: 508 x 508 mm (20.0 x 20.0 in.)
Min. board size: 50 x 50 mm (2.0 x 2.0 in.)
508.1 Two-Segment
(3, 4)
Max. board size: 700 x 508 mm (27.6 x 20.0 in.)
Max. board size (2x boards): 350 x 508 mm (13.8 x 20.0 in.)
Min. board size: 50 x 50 mm (2.0 x 2.0 in.)
Conveyor
Max. board/carrier length 508 mm (20.0 in.), Two-Segment up to 700 mm (27.6 x 20.0 in.)
Min. board/carrier length 50 mm (2.0 in.)
Max. board/carrier width 508 mm (20.0 in.)
Min. board/carrier width
(4)
50 mm (2.0 in.)
Max. board/carrier thickness 15.2 mm (0.6 in.)
Max. overboard clearance 120 mm (4.7 in.)
Max. underboard clearance 40 mm (1.5 in.)
Edge clearance
(5)
3 mm (0.12 in.), edge conveyor including on-rail clamps
Transport height
(6)
Conforms to SMEMA standard for conveyor height; height adjustable from 940-965 mm
(37.0 -38.0 in.) from the oor to bottom of the board.
Load capacity
(7)
7.5 kg (16.5 lbs.)
Operation modes Automatic (SMEMA), manual or pass-through
Specications
(1) Repeatability is measured at full-rated system speed.
(2) Solder capacity and the total weight of the solder pot and pump assembly vary depending on the alloy.
(3) Board size is reduced when operating in parallel or double modes.
(4) Contact the factory regarding smaller or larger boards/carriers.
(5) Edge conveyor conforms to SMEMA standards.
(6) 900 mm (35.4 in.) non-SMEMA conveyor height available upon request.
(7) Total weight of all parts on a conveyor at any time. Contact the factory regarding requirements for greater load capacity.
Cerno 508.1
Specications
Facilities
Requirements
System footprint 508.1 S 1700 x 1700 mm (66.9 x 66.9 in.)
508.1 Two-Segment 2020 x 1750 mm (79.5 x 68.9 in.)
Compressed air 6 bar (90 psi) min., 8 bar (110 psi) max.
Power (mains)
(8)
508.1 S
508.1 Two-Segment
400V/480VAC, 50-60 Hz, 3-phase, 10
kW, 16 A without preheating, or 17 kW,
28 A with preheating
400V/480VAC, 50-60 Hz, 3-phase, 16
kW, 35 A without preheating, or 24 kW,
32 A with preheating
Nitrogen 99.99% (4.0) pure, 4-6 bar (60-90 psi), 1.3 m³/hour (single pot), 2.6 m³/hour (dual pot)
Ventilation 150 m³/hour (90 SCFM), one 100 mm (4.0 in.) dia. duct
System weight
(9, 10)
850 kg (1870 lbs.)
Standards
Compliance
SMEMA, CE
(8) Electrical power varies depending on the conguration.
(9) System weight varies depending on the conguration.
(10) Conguration dependent. Other congurations may be available. Contact Nordson.
Cerno 508.1
System Solutions
Essential —
Cerno 508.1 S
Single-pot selective
soldering for
batch and in-line
production .
An all-in-one ux, preheat, and selective soldering solution equipped with a
single station and single solder pot, ideal for precise batch processing.
Flexible Eiciency —
Cerno 508.1
Two-Segment
Dual-pot selective
soldering in three
modes for batch and
in-line production .
An all-in-one ux, preheat, and selective soldering solution equipped with
two stations, dual solder pots, top and bottom-side preheat, and precision
single-lane in-line processing.
Nordson Electronics Solutions builds the future of electronics reliability all across the globe. We’re proud of the decades of
service and solutions we’ve provided to enhance product reliability. No matter where you are, you’ve likely manufactured or
purchased a product made reliable with our equipment.
Explore the Cerno selective soldering solutions. Continue to see how we support the future.
For more information, contact us at info-electronics@nordson.com.
System Dimensions — Cerno 508.1 S
Front View Top View
Side View