00197902-03_UM_X-Serie-S_EN.pdf - 第26页

1 Introduction User manual SIPLACE X-Series 1.1 Machine overview From software version 710.0 Edition 12/2016 26 1.1.5 SIPLACE X3 S 1 Fig. 1.1 - 5 SIPLACE X3 S placement machine The SIPLACE X3 S placeme nt machine is dist…

100%1 / 416
User manual SIPLACE X-Series 1 Introduction
From software version 710.0 Edition 12/2016 1.1 Machine overview
25
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions. The enhanced precision is realized through the use of high-res-
olution scales and in connection with optimized axis parameters. The scanning units have been
further enhanced to meet these requirements.
The SIPLACE X4 S micron placement machine has two placement areas, one single conveyor or
one dual conveyor. Two boards can be placed at the same time on dual conveyors.
There are four locations available for supplying components. These can be fitted with component
trolleys and configured with up to 40 tracks. At locations 2/3 or 1/4, the table positions for the rel-
evant placement area can be configured on the innermost or outermost position.
1.1.4.1 Overview of placement head configuration
1
1.1.4.2 Overview of placement head configuration (from SC 707.1)
1
Placement area 1 Placement area 2
C&P20 M / C&P20 M C&P20 M / C&P20 M
Placement area 1 Placement area 2
C&P20 M / C&P20 M C&P20 M / C&P20 M
C&P20 M / C&P20 M CPP / CPP
1 Introduction User manual SIPLACE X-Series
1.1 Machine overview From software version 710.0 Edition 12/2016
26
1.1.5 SIPLACE X3 S
1
Fig. 1.1 - 5 SIPLACE X3 S placement machine
The SIPLACE X3 S placement machine is distinguished by
– High precision,
– Intelligent placement optimization,
– Intelligent configuration strategies,
– Placement performance up to the high end process range
User manual SIPLACE X-Series 1 Introduction
From software version 710.0 Edition 12/2016 1.1 Machine overview
27
Three placement methods are possible for processing the components:
– Collect&Place,
– Pick&Place and
– A combination of Collect&Place and Pick&Place (mixed mode).
The SIPLACE X3 S placement machine has two placement areas, one single conveyor or one
dual conveyor. Two boards can be placed at the same time on dual conveyors.
There are four locations available for supplying components. These can be fitted with component
trolleys and configured with up to 40 tracks.
The SIPLACE X3 S placement machine has three gantries. The two gantries in placement area 1
point to location 4. The gantry in placement area 2 points to location 2.
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
1.1.5.1 Overview of placement head configuration
1
CPP_H = Multistar CPP in high assembly position
CPP_L = Multistar CPP in low assembly position
Placement area 1 Placement area 2
C&P20 / C&P 20 C&P20
C&P20 / C&P 20 CPP_L
C&P20 / C&P 20 CPP_H
CPP_L/CPP_L CPP_L
CPP_H / CPP_H CPP_H
CPP_L/CPP_L CPP_H
C&P20 / C&P 20 TH
CPP_L/CPP_L TH
CPP_H / CPP_H TH
TH / TH TH