NPM Calibration Manual-En.pdf - 第76页

NPM Maint en anc e E di ti on 9.11 Hei ght Off set EJM9BE-M B-09M-21 Page 9-75 11 Press + [OK]. • T he head mov es to the m easurement posit ion. 12 Set the p ickup-posit io n-he ight teaching j ig. ∗ Set t he pick up-po…

100%1 / 99
NPM
Maintenance Edition
9.11 Height Offset
Page 9-74 EJM9BE-MB-09M-21
5
Attach the nozzle.
12-nozzle head
∗
Attach the 230CS nozzle to the nozzle
position 4.
8-nozzle head
∗
Attach the 230C nozzle to the nozzle position
3.
2-nozzle head
∗
Attach the No.1003 nozzle to the nozzle
position 2.
6
Turn OFF the servo switch.
7
Open the safety cover.
8
Attach the nozzle.
9
Close the safety cover.
10
Turn ON the servo switch.
NPM
Maintenance Edition
9.11 Height Offset
EJM9BE-MB-09M-21 Page 9-75
11
Press + [OK].
•
The head moves to the measurement
position.
12
Set the pickup-position-height
teaching jig.
∗
Set the pickup-position-height teaching jig in
the No.2 slot on the left side of the table
selected in step 3.
13
Press + [OK].
•
The calibration is carried out.
UnitCalibHeadHightMeasure-02E00
11
Pickup-position-height teaching jig
(No.2 slot)
UnitCalibHeadHightMeasure-03E00
13
UnitCalibHeadHightMeasure-03J00
13
Pickup-position-height teaching jig
NPM
Maintenance Edition
9.11 Height Offset
Page 9-76 EJM9BE-MB-09M-21
14
Set the pickup-position-height
teaching jig.
∗
Set the pickup-position-height teaching jig in
the No.9 slot on the center of the table
selected in step 3.
15
Press + [OK].
•
The calibration is carried out.
16
Set the pickup-position-height
teaching jig.
∗
Set the pickup-position-height teaching jig in
the No.16 slot on the right side of the table
selected in step 3.
Pickup-position-height teaching jig
(No.9 slot)
UnitCalibHeadHightMeasure-04E00
15
Pickup-position-height teaching jig
(No.16 slot)