00198092-01_JC_PM_WF2_TX_EN.pdf - 第37页
11 WF 2 TX-Series Maintenance Clean feeder modules and cut the tapes 3 min 1 / 1 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a…
10 WF 2 TX-Series Maintenance Clean the stationary camera (CPP/ TH) 2 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C2
www.asm-smt.com
7 Return the component reject bin.
11 WF 2 TX-Series Maintenance Clean feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from feeder
modules.
2 Cut the remaining tape directly at the
feeder.
3 After cutting: Ensure to leave 2 holes over-
lapping.
4 Repeat steps 1-3 for other feeder tables.
www.asm-smt.com