00198092-01_JC_PM_WF2_TX_EN.pdf - 第38页
www.asm-smt.com
11 WF 2 TX-Series Maintenance Clean feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from feeder
modules.
2 Cut the remaining tape directly at the
feeder.
3 After cutting: Ensure to leave 2 holes over-
lapping.
4 Repeat steps 1-3 for other feeder tables.
www.asm-smt.com
12 WF 2 TX-Series Maintenance Switch on machine and return the tables with JTF-ML 6 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 With JTF-ML: Without JTF-ML, please go
to next task.
2 Switch on machine. 3 Return all COT 2.
4 Close the cover 2. 5 Press insert COT button to dock table. 6 Return all COT 1.