00198092-01_JC_PM_WF2_TX_EN.pdf - 第54页

www.asm-smt.com

18 WF 2 TX-Series Maintenance Endurance run 5 min 1 / 1

CAUTION! Refer to safety instructions in user manual before commencing Maintenance

Machine Status ON Conveyor Empty

NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:

www.asm-smt.com

1 Click on "endurance run after mainten-

ance" icon.

2 Check results. 3 If result is NOT OK (red cross) save report

and contact service.

4 Click on "display production status" icon. 5 Stop production and click on "block trans-

port" icon.

6 Unblock both lanes and click "OK".