TDS_InJet_3179_CRD_ENG.pdf - 第3页

InJet ® 3179 CRD TECHNICAL DATA SHEET 3 www.dct.cleaning Application name Recommended application Recommended temperature Total cleaning process time Capacity per 8 hours Stencil, misprint, squeegee 20 – 40°C 68 – 104 °F…

100%1 / 8
InJet
®
3179 CRD
TECHNICAL DATA SHEET
2
www.dct.cleaning
GENERAL INFORMATION
The InJet
®
3179 CRD including 100% closed loop with
processes of cleaning, rinsing and drying technologies.
All of the processes are fully automated, and take place
in one process chamber.
The InJet
®
3179 CRD is designed to remove solder pastes
and SMT adhesives from non-standard oversized stencils
up to 1170 x 2160 x 2015 mm or 46.1 x 85 x 79.3 in,
respectively.
Depending on your cleaning requirements,
the DCT project manager, in collaboration
with a local distributor, will advise you
on a suitable water-based cleaning fl uid
and the correct setup of the entire process.
InJet
®
3179 CRD
TECHNICAL DATA SHEET
3
www.dct.cleaning
Application
name
Recommended
application
Recommended
temperature
Total cleaning
process time
Capacity
per 8 hours
Stencil, misprint, squeegee
20 – 40°C 68 – 104 °F 18 min. 54 / 27 ***
Pumprint
40 – 55°C 104 – 131 °F 18 min. 54 / 27 ***
PCB
35 – 55°C 95 – 131 °F 30 min. 768 *
4 INDIVIDUAL PROCESSES
CLEANING PARAMETRES
C
CLEANING
RINSING
DRYING
D
CR
D
R
highly recommended recommended applicable
* PCB eurocards / per 8 hours (calculated for dimension of 100 x 160 mm / 3.94 x 6.3 in)
* * Parts in soldering palette / per 8 hours (320 x 500 x 50 mm / 12,6 x 19,7 x 1,97 in)
* * * Stencils, pumpprints larger than 736 x 736 mm / 29 x 29 in
LEGEND:
InJet
®
3179 CRD
TECHNICAL DATA SHEET
4
www.dct.cleaning
Dimensions (w x l x h) 1170 x 2160 x 2015 mm 46.1 x 85 x 79.3 in
Weight 900 kg 1984 lbs
Ø energy consumption per cycle 2,5 kWh 2.5 kWh
Cleaning and rinsing  uid consumption
per cycle
0,05 – 0,3 l 0.01– 0.08 gal
Compressed air consumption per cycle 1500 l / cycle 396.26 gal / cycle
Max. dimensions of the cleaned parts 100 x 1700 x 900 mm 3.94 x 66.93 x 35.43 in
Exchangeable mechanical  lter
of cleaning and rinsing  uid
5 – 200 μm 5 – 200 μm
Operating pressures
cleaning: 1,5 Bar – 3,5 Bar,
rinsing: 0,3 Bar – 2,0 Bar
cleaning: 21.76 PSI – 50.76 PSI,
rinsing: 4.35 PSI – 29 PSI
Cleaning  uid  ow rate 400 l / min 105.67 gal / min
Temperature range setting of the cleaning
and rinsing  uid
From ambient temperature to 60°C From ambient temperature to 140°F
Conductivity range settings of the rinsing
uid in the tanks.
0 – 2000 μS/cm * optional 0 – 2000 μS/cm * optional
Temperature range setting of the drying From ambient temperature to 80°C From ambient temperature to 176°F
Noise level < 70 dB < 70 dB
Device control PLC + 8,4“ touchscreen PLC + 8.4“ touchscreen
Volume of the storage tanks 125 l 33 gal
TECHNICAL PARAMETERS
DIMENSIONS MINIMUM SERVICE SPACE
AROUND THE MACHINE
2160 mm
85 in
2015 mm
79.3 in
1170 mm
46.1 in
600 mm
23.6 in
600 mm
23.6 in
600 mm
23.6 in
600 mm
23.6 in
open door
450 mm
17.7 in
open door
450 mm
17.7 in
metric units imperial units