TK30169.Inspection Camera Distortion Correct.pdf - 第3页
SMT Software Engineering Group IM Operations Y AMAHA MOTOR CO., L TD MDOC-SOFT50403 3/7 If inspection is performed with this condition, it may be j u dged as misalignment. (Fig 2. 3) Fig 2.3 Misjudgment at inspect…
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50403
2/7
1. Machine and Version
This function is available with the following machine and software version.
Table 1.1 Machine and Version
Machine Version Note
YSP V3.45STD R1.000 or later
YCP10 V4.49STD R1.000 or later
2. Overview
This function confirms distortion or leaning of the inspection camera and makes adjustment.
Even when objects are aligned regularly as Fig 2.1, they sometimes look misaligned at the
end of the view as Fig 2.2, because of distortion of the lens or leaning of the camera itself.
Fig 2.1 Visual view of objects
Fig 2.2 Inspection camera view of objects
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50403
3/7
If inspection is performed with this condition, it may be judged as misalignment. (Fig 2.3)
Fig 2.3 Misjudgment at inspection
“Inspection Camera Distortion Correction” acquires information such as distortion of the lens
and leaning of the camera, and adjusts the inspection data. (Fig 2.4)
Fig 2.4 View with Inspection Camera Distortion Correct
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50403
4/7
3. Setting Method
Settings to use this function are as follows.
3.1. Machine Setting
Set [Machine Information] - [Installation Setting] – [Option] – [Insp Camera Distortion
Correct] to “Use”.
Fig 3.1 Installation Setting
※ Please make sure to adjust the inspection camera before using the Inspection Camera
Distortion Correct function.