manual-flexible-arm-fume-extractor-jbc-0035573_ID-255561_EN.pdf - 第3页

40 mm 50 mm 60 mm 80 mm 100 mm 130 mm 130 mm par a manuales - neg r o plano 200 mm 300 mm w w w .jbc t ools .c om ST A TION 1 F ilt er ST A TION 2 POR T 1 PED AL 1 PED AL 2 F AE2 FUME EX TR A C T OR POR T 2 ST A TION 3 S…

100%1 / 8
2
Packing List
The following items are included:
Flexible Arm ................................................. 1 unit
Manual ........................................................... 1 unit
Ref. 0035573
Screws ......................................................... 3 units
DIN7982 - ø3.5x25 - black burnished
Ref. 0019142
This manual corresponds to the following reference:
FAE022
- Total length (tube comressed): 1.20m / 47.24in
- Max. operating distance: 1.00m / 39.37in (see page 4)
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - negro plano
200 mm
300 mm
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
3
Assembly Example
Connect the flexible hose to
the flexible arm.
FAE2
Fume Extractor
FAE010
Flexible Hose ø50mm
Total length: ~1.6m / ~63in
Fix the flange on your
workbench with the
supplied screws (more
information on page 6).
FAE 022
Flexible Arm ø50mm
Bear in mind the installation
dimensions (see page 5).
100 cm / 39.4 in max.
4
Hanging arm
no distance
To avoid breaking the arm, do not extend the
arm more than 100 cm / 39.37 in from the
center of its base and do not go below the
minimum bend radius of 20 cm / 7.87 in.
workbench
breakage
Do not install the flexible arm on shelves or
higher levels than the work bench. Forced
bending radii can cause the arm to break.
How to use
min. bending
radius
20cm
7.87in
Max. operating distance
1.00m / 39.37in
Arm Installation
Arm Positioning
Thanks to the flexibility of
the arm, its position can be
adapted to the particular
working environment and
conditions.
... or with the nozzle resting on
the workbench.
The arm can be used in an
upright position with the nozzle
hanging over the workplace ...
Nozzle resting
on the workbench