TM3439.Setup Verification Setup Cancellation.pdf - 第3页

   SMT Software Eng ineering Group IM Oper a tions Y AMAHA MOT OR CO., L TD   MDOC- SOFT50132  3/8 3. Setting method There is no sett ing to use t his functio n. 4. Operation m ethod 4.1. Displa y the [S etu p Su…

100%1 / 8
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50132
2/8
1. Introduction
Target model and version are as follows.
Table 1.1 Target Model and Version
Item Object Remarks
Target model YS24X, YS24, YS12P, YS12F, YS12, YS100, YS88,
YG12F, YG12, YG300
Target version V3.27STD R1.000 or later
2. Outline
A fucntion has been added that all complete setup parts on the machine become incomplete,
with "OP002: Setup Verification" is activated.
You need to confirmation the feeder/pallet is after setup cancellation.
Auto-running is not started until confirmation work is carried out.
For example, please use this function to let all operators begin with the confirmation of all parts
after they rotate.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50132
3/8
3. Setting method
There is no setting to use this function.
4. Operation method
4.1. Display the [Setup Support] dialog
Click the [Setup Support] button to display the [Setup Support] dialog.
*Name of the [Feeder Remove] button and [Feeder Remove] dialog have been changed to the
[Setup Support] button and the [Setup Support] dialog.
The [Setup Support] button becomes invalid during auto-running.
*If "Module Stop" or "Non Stop Switching Board Data" is effective in a dual lane machine, and if
there is a lane of STOP/RESET, the button becomes valid.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50132
4/8
4.2. Setup cancellation start
Click the [All Setup Cancel] button on the [Setup Support] dialog.
[All Setup Cancel] button
For all parts which becomes a target of the Setup Verification, setup cancellation is
performed. *The free parts is targeted for setup cancellation.
When use TYPE-N option with a dual lane machine, the following buttons are displayed.
[Lane1 Setup Cancel] button
For parts that become a target of the Setup Verification used in lane 1, setup
cancellation is performed.
[Lane2 Setup Cancel] button
For parts that become a target of the Setup Verification used in lane 2, setup
cancellation is performed.
*In the case of free parts, it applies to parts placed on the target lane side.
*The button on the target lane which is auto-running becomes invalid.