1OM-1603-006_w.pdf - 第76页

1OM-1603 1-19 2. Name and Function of Each Section : Chap.1 1007-004 [6] [PNL CHANGE] Button This button is used to select either the front or the rear operation panel. This button is prepared on each operation panel. Wh…

100%1 / 229
1OM-1603
1-18
2. Name and Function of Each Section : Chap.1
1003-003
[5] [LOCK] Lamp
When this lamp is ON, it indicates that the operation panel is set in the
"LOCK" mode and the operation panel on this lamp side is available.
The other operation panel cannot be selected.
When the operation panel on the opposite side is used with this lamp "ON",
the lamp starts ickering.
To cancel the ickering, press the [PNL CHANGE] button and follow the
procedure to set the "LOCK" mode again.
CAUTION
Beforeperforminganywork,conrmthatthe"LOCK"
lamp on the operation panel is "ON" (green).
•
If the "LOCK" lamp is not turned on, the machine
can be operated at any time from the front and
rear sides, endangering the operators around
the machine.
•
Before performing any setup work with the
machine being powered up, turn on the [PNL
CHANGE] button and the "LOCK" lamp on the
front or the rear operation panel.
1OM-1603
1-19
2. Name and Function of Each Section : Chap.1
1007-004
[6] [PNL CHANGE] Button
This button is used to select either the front or the rear operation panel. This
button is prepared on each operation panel. When the LED of the button is
ON, it indicates that the corresponding operation panel is available.
When this button is pressed with the LED "ON", the operation panel is set in
the "LOCK" mode and the "LOCK" lamp illuminates.
When the operation panel is set in the "LOCK" mode, the other operation
panel on the opposite side cannot be selected on the other operation panel
side.
To cancel the "LOCK" mode, press this button again.
Note
(a) While the LED of this button is ON, the followings become
available.
•
Touch Screen
•
[START] and [STOP] Buttons and [EMERGENCY STOP] Switches
(b) The [STOP] buttons and the [EMERGENCY STOP] switches are
always available, regardless of which [PNL CHANGE] button is
selected.
(c) When both operation panels are not set in the "LOCK" mode and the
[PNL CHANGE] button on the unavailable operation panel side is
pressed, the unavailable operation panel is selected and set available.
(d) When the operation panel is not locked and the [STOP] button on
the unselected operation panel is pressed, the operation panel on the
pressed button side becomes activated automatically.
[7] [EMERGENCY STOP] Switch
Press this switch to immediately stop the machine in an emergency.
When this switch is pressed, the machine stops running immediately and the
[POWER ON] button on the operation panel illuminates in red.
1OM-1603
1-20
3. Mechanism for Surface Mounting : Chap.1
1012-004
3. Mechanism for Surface Mounting
3.1 Location of Related Units
Component Recognition
Section
Component
Recognition Section
XY Beam Section
Placement Head Section
PCB Positioning Section
Cart Installation Section
PCB Transfer
Section
Nozzle Stocker Section
PEC Recognition Section
F1A16