00194387-02.pdf - 第16页
2 Retrofit instructions for third tape r eel adapter for component trolley R2, HF series / D3 Third tape reel adapter for compon ent trolley R2 06/2006 Edition 16 : Use two screws on each side to screw the inserting comb…
Third tape reel adapter for component trolley R22 Retrofit instructions for third tape reel adapter for component trolley R2, HF series / D3
06/2006 Edition
15
2.3 Retrofit
: Dock the relevant component trolley out of the machine.
2
: Use two screws to screw each of the two fixing brackets to the side walls (one on each side)
of the component trolley.
2
2
2
2
2
2
2
2
2
Screw fixing bracket to the side wall using two screws
(right-hand picture)
2 Retrofit instructions for third tape reel adapter for component trolley R2, HF series / D3 Third tape reel adapter for component trolley
R2
06/2006 Edition
16
: Use two screws on each side to screw the inserting comb onto the fixing bracket.
2
2
: Insert the tape reel holders into the inserting comb.
2
2
Use two screws on each side to screw the insert-
ing comb onto the fixing bracket.
Insert the tape
reel holder
Third tape reel adapter for component trolley R22 Retrofit instructions for third tape reel adapter for component trolley R2, HF series / D3
06/2006 Edition
17
2.3.1 Holder for third tape reel and splicing unit (for machine height 930 / 950 mm)
If the "holder for third tape reel“ and "splicing unit“ options are used at the same time, then the
shortened idler pulley (03003293-0102 ...) must be used on the tape reel holder (see photograph)
because of the tape infeed spring of the splicing unit.
This only applies to the two machine heights 930 / 950 mm. 2
2
2
Shortened idler pulley for "component trolley R2 SIPLACE HF 03020128- xx "
e.g. when feeder module 12 - 16 is used with the splicing unit