00194387-02.pdf - 第19页

Third tape reel adapter for component tro lley R22 Retrofit in structions for third tape reel adapter for component trolley R2, HF series / D3 06/2006 Edition 19 2.4.2 SMEMA 830 SD (w ith splice detection) The adapter is…

100%1 / 22
2 Retrofit instructions for third tape reel adapter for component trolley R2, HF series / D3 Third tape reel adapter for component trolley
R2
06/2006 Edition
18
2.4 Setting up the adapters and tape reels
On the component trolley, the front and back are defined as follows: 2
2
The adapters must be plugged into the front or back locations, depending on the SMEMA height.2
2.4.1 SMEMA 830 (without splice detection)
The adapter is fitted at the front two holes: 2
2
Tape reels up to 17 inches in diameter may be used. 2
Back
The side on which you
push or pull
Front
The side that is docked
into the machine
Third tape reel adapter for component trolley R22 Retrofit instructions for third tape reel adapter for component trolley R2, HF series / D3
06/2006 Edition
19
2.4.2 SMEMA 830 SD (with splice detection)
The adapter is fitted at the back two holes: 2
2
Tape reels up to 15 inches in diameter may be used. 2
2.4.3 SMEMA 900 (without splice detection)
The adapter is fitted at the front two holes: 2
2
Tape reels up to 19 inches in diameter may be used. 2
2 Retrofit instructions for third tape reel adapter for component trolley R2, HF series / D3 Third tape reel adapter for component trolley
R2
06/2006 Edition
20
2.4.4 SMEMA 900 (with splice detection)
The adapter is fitted at the back two holes: 2
2
Tape reels up to 17 inches in diameter may be used. 2
2.5 Final tasks
: Set up the component trolley with tape reels.
: Dock the component trolley into the machine.
2
2