Specification SIPLACE Material.pdf - 第7页
7 SIPLACE Material Tower Technical data Configuration Specification St andard configuration Machine type S tand-alon e T ape detection Diameter - automatic Width detection Weight detection Automati c barcode detection Co…
6
SIPLACE Material Tower
Description
The SIPLACE Material
Tower is a storage system
for SMT-specific materials
that is directly controlled by
the SIPLACE Material Man-
ager, the intelligent solution
for SMT-typical material
logistics.Since it issues
requested materials in less
than 10 seconds, it saves
your operators lots of valu-
able time.
As a hardware component in
your material logistics sys-
tem, the SIPLACE Material
Tower is the ideal solution
for:
• Intermediate storage in
pre-setup areas
• Material supply storage in
the immediate vicinity of
your SMT lines
Your benefits at a glance:
• Optimized material supply
for SMT lines
• Elimination of unneces-
sary material withdrawals
and returns from/to stor-
age
• Fewer material-related
production interruptions
• Fewer trips and faster pro-
cedures in the pre-setup
area
• Component reels are
stored safely with mini-
mum space requirements
(932 reels on only 1.5
square meters or 16
square feet)
• ESD and moisture protec-
tion
• Inventory and MSD moni-
toring in real time
Optimized material supply
for SMT lines
The SIPLACE Material
Tower was designed to be
not only an MSD-capable
addition to your material
warehouse, but to also func-
tion as an intermediate stor-
age system, positioned
directly adjacent to your pre-
setup areas and SMT lines.
With the SIPLACE Material
Tower, you can move all the
required material for an
entire production job from the
main warehouse to the pro-
duction floor in a single step
and keep unconfigured reels
directly at the line until they
are needed. Withdrawing a
reel takes only a few sec-
onds.
The SIPLACE Material
Tower is also an ideal solu-
tion for Kanban procedures
in high-volume production
environments.
Pre-setup areas in high-mix
production environments
also benefit from the
SIPLACE Material Tower. It
reduces trips to the main
material warehouse, elimi-
nates unnecessary removals
and returns from/to inven-
tory, and speeds up your
setup processes.
7
SIPLACE Material Tower
Technical data
Configuration
Specification
Standard configuration
Machine type Stand-alone
Tape detection Diameter - automatic
Width detection
Weight detection
Automatic barcode detection
Control PC, keyboard and LCD screen
Windows version Windows 8.1 or Windows 10
Software SIPLACE Material Tower software, simple integration into SIPLACE Mate-
rial Manager
Job planning software
MSL tracking, in conjunction with SIPLACE Material Manager
Operator language adjustable (English, German)
Use group access rights
Ambient temperature Temperature:
Relative humidity:
Noise level:
15°C - 30°C
10% - 60%
50dB
Other items included Power connection cable Power connection cable
SIPLACE Material Tower - Small SIPLACE Material Tower - Large
Power supply 100 - 240 VAC, 50-60 Hz 100 - 240 VAC, 50-60 Hz
Power consumption 0.4 kW 0.4 kW
Required circuit breaker 10 A 10 A
Storage
4"-7" reels:
11"-15" reels:
Max. weight:
8-72 mm tapes
8-72 mm tapes
3.5 kg
8-72 mm tapes
8-72 mm tapes
3.5 kg
Maximum capacity
a
For 4"-7" reels
A combination of 4" -
15" reels
612 reels
320 x 4"-7" and 121 x 11"-15" reels
932 reels
480 x 4"-7" and 121 x 11"-15" reels
Stock removal time 9-11 seconds per reel 9-11 seconds per reel
a) For 8 mm tapes
8
SIPLACE Material Tower
Technical data
Compressed air quality (air dryer
a
)
a) Option: The drying unit is used to maintain the humidity in the SIPLACE Material Tower and may not
be used as a drying chamber.
Compressed air 6 bar - 10 bar
Min. compressed air flow
With flow limiter
Without flow limiter
12 m
3
/h at 6 bar
18 m
3
/h at 6 bar
Typical compressed air consumption
With flow limiter
Without flow limiter
Nominal consumption
b
b) Depends on work load and environment.
12 m
3
/h at 6 bar
18 m
3
/h at 6 bar
Approx.6 m
3
/h at 6 bar
Required compressed air quality The membrane dryer has an integrated nano filter. The
compressed air flows through this before entering the
membrane dryer.
Air connection diameter 8 mm
Particulate class 1 Particulate quantity per m
3
compressed air:
0.1 - 0.5 µm (= particle size): max. 20,000 particles
0.5 - 1 µmm: max. 400
1 - 5 µmm: max. 10
Water class 2 Required pressure dew point at -40°C or lower.
Oil class1 Oil quantity per m³ compressed air max. 0.01 mg
Applies to liquid oil, oil aerosol, oil vapor
PC requirements
Processor Dual Core i3 Processor, 64 bit compatible
INTEL or AMD
Memory 2 gigabyte
Recommended: 4 gigabyte
Graphics card DirectX 9.0 supported
No high-end graphics speed needed.
Recommended: Do not use Nvidia, GUI artefacts could
occur.
Network card 2 network cards required (min. GB link):
1x connection to SIPLACE Material Tower
1x network connection
Hard disk 200 gigabyte, SSD recommended
Operating system Minimum: Windows 7, 64 bit version
Recommended: Windows 8.1, 64 bit version