00193875-01.pdf - 第52页
4 Switching the SIPLACE line on and off SIPLACE Software Guide Version 101.xx 4.2 Switching off the SIPLACE line Issue 05/03 EN 52
SIPLACE Software Guide Version 101.xx 4 Switching the SIPLACE line on and off
Issue 05/03 EN 4.2 Switching off the SIPLACE line
51
Æ Close down the station computer software by selecting Mode --> Shut down computer....
Æ Wait until the computer has shut down completely, and then switch off the station at the main
switch.
NOTE
Wait for about 30 seconds before switching on the station again. 4
4 Switching the SIPLACE line on and off SIPLACE Software Guide Version 101.xx
4.2 Switching off the SIPLACE line Issue 05/03 EN
52
SIPLACE Software Guide Version 101.xx 5 Error information
Issue 05/03 EN 5.1 General
53
5 Error information
5.1 General
If errors occur during operations at the placement station, you can call up information about the
possible causes and ways of eliminating the error in question. 5
To do this click the Error information button to start the Help system for the station computer.5
– The information displayed will always be related to the error that is currently displayed on
screen, and from which the Help system was called.
– You can find information about other errors using the help system index. Simply enter the num-
ber of the error you wish to find, and the system will call up the description that belongs to this
error.
5.2 Calling error information
If an error occurs during operation, the appropriate error message is displayed in red in the status
bar of the user interface. The Error information and Clear error buttons are active in the main
view (see Fig. 5.2 - 1). 5
You use the Clear error button to clear an error after the cause of the error has been eliminated.5