SM_SXDX12_intern_03-2017_en.pdf - 第37页

a c p a g e

Service Work

Replacement Y-Guide Rails Final Work

36 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2

Among them was found a Teflon protector. This is to avoid that the magnets will be scratched.

Press with the lever the guide rail and tight the rail to the torque wrench with 10Nm.

Repeat this process until the whole bar on the guide rail and all screws are tight. If necessary, check it

using a feeler gauge, if the guide rails applied properly.

Check the position of the Y-magnets with the spacer for Y magnets 03065304-xx and point it out again,

if necessary. Please consider also the safety information in chapter "Changing the magnets.

Set the Y-leadership device, cpl. as shown in the image

of the magnets

acpage

Item no.: ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany