manual-flexible-arm-fume-extractor-jbc-0035523_ID-255368_EN.pdf - 第6页

70 cm / 27.6 in max. 6 Clamp Dimensions ~57mm ~ 2.24in ~5mm ~0.20in ~ 72mm ~ 2.83in ~84m m ~3.3 1in ma x. o pe ni ng ~6 0mm ~ 2.36in

100%1 / 8
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - negro plano
200 mm
300 mm
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
5
To plug the windings back in,
align them with each other and
firmly push them together.
If the flexible arm loses
firmness, it must be re-
compressed.
To increase compression, turn
the arm slightly clockwise.
Once the arm is compressed,
readjust its position.
To install a new nozzle, turn
the nozzle bayonet clockwise
to lock it in place.
Nozzle Replacement
Windings Compression
Note: In case of breakage, the
windings can be plugged back
into each other.
Nozzle and tube are connected
to each other by means of a
bayonet lock. This makes it
easy to replace the nozzles.
Disassemble the nozzle by
holding the tube with one
hand. With the other hand turn
the nozzle counter-clockwise
and pull it out.
70 cm / 27.6 in max.
6
Clamp Dimensions
~57mm
~2.24in
~5mm
~0.20in
~72mm
~2.83in
~84mm
~3.31in
max. opening ~60mm
~2.36in
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - negro plano
200 mm
300 mm
Notes
7