00194716-04_AI_Abwurfbehaelter_Abfrage_X-D3_de_en.pdf - 第56页
Installation Fitting the Sensors Fitting Sensors for C&P20 and CPP 56 Option Verify Reject Bin Option Abfrage Abwurfbehälter 3.1.1 Fitting Sensors for C&P20 and CPP Overview of sensors fo r C&P20 and CPP with…
Installation
Fitting the Sensors
Option Verify Reject Bin Option Abfrage Abwurfbehälter 55
3 Installation
3.1 Fitting the Sensors
► Remove the nozzle changer, if required.
► If required, loosen the component feed device and pull this slightly out of the machine.
If the 1-Wire-Hub is to be fitted in a one gantry placement area, you may need to loosen the compo-
nent feed-in device at location 2 and 4 and pull this slightly out of the machine. Please read the latest
service manual for the relevant machine prior to this.
Standard: for C&P6, C&P12, TwinHead, C&P20 and CPP
▪ Cable X series/HF R2 reject bin [03022078-xx]
▪ Sensor S1 is used for the component reject bin verify query
▪ Sensor S2 is used for the nozzle reject bin verify query
Optional: additional sensors for the CPP in pick&place mode with stationary cameras
▪ Reject bin sensors for upgrade [03079030-xx]
▪ Sensor S1 is used for the component reject bin verify query with stationary camera
▪ Sensor S2 is used for the component reject bin verify query with stationary camera at the location
with the MTC
CAUTION
Component feed device - heavy machine component
The COT insert is heavy. You may need to enlist the help of a second person.
CAUTION
Screws
When fitting the sensors S1 and S2, make sure that you do not not use any magnetic (electri-
cally conductive) screws! Only use the plastic screws provided to fasten the sensor (DIN85-
M3x6-PA [00305381-xx])!
Installation
Fitting the Sensors Fitting Sensors for C&P20 and CPP
56 Option Verify Reject Bin Option Abfrage Abwurfbehälter
3.1.1 Fitting Sensors for C&P20 and CPP
Overview of sensors for C&P20 and CPP without without stationary cameras
Overview of sensors for CPP with stationary cameras
Installation
Fitting Sensors for C&P20 and CPP Fitting the Sensors
Option Verify Reject Bin Option Abfrage Abwurfbehälter 57
3.1.1.1 Fitting the Nozzle Reject Sensor for C&P20 and CPP
► Fix the sensor S2 to the sensor carrier [03021179-xx] with the 2 plastic screws DIN85-M3x6-PA
[00305381-xx].
► Fix the sensor mount (with sensor) to the nozzle reject bin carrier (2 screws M3x6, DIN912).
CAUTION
Screws
Only use the plastic screws provided to fasten the sensor (DIN85-M3x6-PA [00305381-xx])!
Sensor for the C&P20 nozzle reject bin
1. Sensor mount [03021179-xx]
2. Sensor S2