00198481-01_Technical_Training_E_by_DEK_EN.pdf - 第68页
8 Communication and Control 8.1 M36 68 Technical Training E by DEK 12/2017 8.1.2 Control Enclosure M36 Module - Dual Stepper Dual Stepper Drive Card 1. SW1 1 2 3 4 5 6 7 8 9 10 Slots X1 and X3 OFF ON ON ON ON OFF ON OFF …
8 Communication and Control
8.1 M36
Technical Training E by DEK 12/2017 67
Control Enclosure M36 Block Diagram
1. Rotary motors
8 Communication and Control
8.1 M36
68 Technical Training E by DEK 12/2017
8.1.2 Control Enclosure M36 Module - Dual Stepper
Dual Stepper Drive Card
1. SW1 1 2 3 4 5 6 7 8 9 10
Slots X1 and X3 OFF ON ON ON ON OFF ON OFF ON OFF
Slot X2 OFF ON ON ON ON OFF ON ON ON OFF
2. SW2 1 2 3 4 5 6 7 8 9 10
Slot X1 OFF ON ON ON ON OFF ON OFF ON OFF
Slots X2 and X3 OFF ON ON ON ON OFF ON ON ON OFF
8 Communication and Control
8.1 M36
Technical Training E by DEK 12/2017 69
8.1.3 Control Enclosure M36 Module - Next Move
Next Move ES Card
The Next Move ES can control six stepper motor axes via stepper drive cards.
The card also incorporates a CAN encoder/decoder which connects to I/O Node boards and Servo/
Stepper Nodes using a CAN bus network.
When exchanging the card ensure that the correct jumper setting are set.
1. JP2 6. JP1
2. USB connector: M36SK27 7. JP3
3. Not used 8. JP4
4. CAN bus connector: M36SK28 9. JP5
5. 7 Segment: LED display