5OM-1343-008_w.pdf - 第10页
7 AKFE-ID Installation/T ransfer and After-Sale Service (1) Installation/T ransfer (a) Do not install or transfer the machine on the customer side after shipment. T o ensure perfect operation of the machine, including sa…
6
AKFE-ID
In no event shall Hitachi be liable for any warranty other than the express one here
and any implied warranties of merchantability or fi tness for any particular purpose.
In addition, Hitachi is not liable for any direct or indirect loss or damages
whatsoever, whether based upon express or implied warranty.
No oral or written information, or advice/suggestion given by Hitachi (its
executives, employees, agencies and all concerned) to the original purchaser or a
third party shall create a warranty or obligation to Hitachi, regarding the conformity
with the performance of the machine. Formally approved information or advice/
suggestion are excluded.
Hitachi is not responsible for any damage to the provided application software or
loss of data, arising from any damage to this machine.
(4) Warranty Certifi cate
This certifi cate cannot be reissued. Please keep this in a safe place.
0601-002
7
AKFE-ID
Installation/Transfer and After-Sale Service
(1) Installation/Transfer
(a) Do not install or transfer the machine on the customer side after shipment.
To ensure perfect operation of the machine, including safety and accuracy,
only our installation service department will install the machine or transfer it
to another place.
(b) Before the machine is installed, the installation site must be properly
prepared on the customer side to ensure the installation requirements
described in the instruction manual.
(c) When the machine should be transferred to another place, please contact
the marketing department or sales agency of Hitachi High-Technologies
beforehand to avoid any trouble related to the transfer.
When the machine is transferred to another place without prior notice to us,
it may break down or malfunction.
In that case, we will in no way be liable for any damage to the machine
regardless of the possibility of any or such damages arising from the
displacement.
Example of Failure and Malfunctions after Machine Transfer:
Frequency and voltage difference in local site may cause a machine
malfunction.
The surrounding circumstances (electromagnetic radiation obstruction or
noises) may cause a machine malfunction.
(2) After-Sale Service
(a) Contact the marketing department or sales agency of Hitachi High-
Technologies for after-sale servicing.
(b) Consult us for maintenance contracts, inspections and servicing contracts,
etc., after expiration of the warranty.
Requirements, Orientation, and Training for Operators
Only well-trained personnel should operate the machine.
Mishandling of the machine will cause a major accident.
We offer orientation and training sessions, using our facilities or local ones to ensure
perfect operation of the machine, including safety and accuracy.
Consult the marketing department or sales agency of Hitachi High-Technologies for the
training application. (Training Fee Charged)
0601-002
8
AKFE-ID
About Specifi cation Change
Consult the marketing department or sales agency of Hitachi High-Technologies for
desired changes of the machine specifi cations.
In no event will we be liable for any direct, indirect, special, incidental, or consequential
damages resulting from any modifi cation made without any prior notice in a written form.
About Disposal of Machine
Strong permanent magnets are used in the moving mechanisms of the X- and Y-axis linear
sections.
The disposal of the machine in whole or part must be distinguished from wastes of the
common man's living.
Contact the marketing department or sales agency of Hitachi High-Technologies for the
detailed information on the machine disposal.
Other Precautionary Items
Trade Marks and Registered Trade Marks
Windows is a registered trademark of the Microsoft Corporation in the United
States and other countries.
All other corporate and product names in this manual are owned by and are the
trademarks or registered trademarks of their respective companies.
Neither (TM) nor (R) marks are described clearly in this manual.
0601-002