5OM-1343-008_w.pdf - 第18页

Safe-7 AKFE-ID Safety Precautions Notes on Installation, T ransfer and Maintenance l Do not install or transfer the machine on the customer side after shipment. T o ensure perfect operation of the machine, including s a…

100%1 / 219
Safety Precautions
Safe-6
AKFE-ID
Notes on Machine Operations
l
This machine uses energetic driving systems and high voltage to run at high
speed. This power and voltage is high enough to cause death or serious injury.
To avoid this danger, respect the following guideline.
• The machine must be used with the covers being attached.
• Be sure to close the covers (door type) before operating the machine.
•
Do not disengage the interlock mechanism of the covers (door type).
l
Whenever you feel danger or abnormality, immediately press the
[EMERGENCY STOP] switch to stop the machine.
If the machine is kept running in abnormal condition, an accident or a
breakdown will result.
l
Conrm that the "LOCK" lamp (green) is ON on the operation panel before
operating the machine.
If the "LOCK" lamp is not turned ON, the machine can be operated at any time
from both front and rear sides, endangering the operators around the machine.
l
When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
After the problem has been rectied completely, reset the machine to its
normal condition.
l
When
the
greenlampofthelighttowerisONorickering(ONandOFF),itindicates
that the static machine is in the "Automatic" mode (standby mode).
l
Incaseofadisasterofanykind,earthquake,storm,ood,re,orlightning,
immediately stop the machine and turn off the power supply.
l
When the machine stops due to a component pickup error, be sure to remove the
mispicked component from the feeder and start the automatic operation.
l
Donotuseanyunspeciedfeeders.
0601-002
Safe-7
AKFE-ID
Safety Precautions
Notes on Installation, Transfer and Maintenance
l
Do not install or transfer the machine on the customer side after shipment.
T
o ensure perfect operation of the machine, including s
afety and accuracy
, only our
installation service department will install the machine or transfer it to another place.
l
Only the maintenance work on items described in this manual should be performed by
the customer
. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are
not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
l
When an alert label has deteriorated and become illegible, contact our service
department.
0601-002
Safety Precautions
Safe-8
AKFE-ID
Notes on Maintenance
l
Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.
l
Before the maintenance work, be sure to turn off the power breaker and lock
them with padlocks.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.
l
Even when the power breaker is set to "OFF", the primary line is powered,
making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance work.
l
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply
andtheservoampliergo"OFF"in10minutesormoreafterthepowerbreaker
is set to "OFF".
0601-002