00195364-0102_Ext_Power_COT_D1_D2_D3_HF.pdf - 第19页
SIPLACE 2 External power supply unit for component trolleys from the SIPLACE D1/D2/D3/HF series 11/2006 Edition 19 2.3 Overview The external power supply unit is used to supply a component trolley from the SIPLACE D1, D2…
2 External power supply unit for component trolleys from the SIPLACE D1/D2/D3/HF series SIPLACE
11/2006 Edition
18
2.2 Safety instructions
DANGER
Make sure that no one is working on the connected component trolley when you switch on the
power supply unit.
The device must only be connected when the placement process has ended and outside the
placement machine.
The device must only be used for the intended usage, which is to supply a component trolley from
the SIPLACE D1, D2, D3 or HF series.
The device must not be manipulated.
Always remove the power plug before opening the device.
2
2
2.2.1 Definitions
DANGER
as used in this manual means that death, severe injury or considerable damage to equipment
w i l l occur if the danger instructions are not followed. 2
2
2
2
2
2
SIPLACE 2 External power supply unit for component trolleys from the SIPLACE D1/D2/D3/HF series
11/2006 Edition
19
2.3 Overview
The external power supply unit is used to supply a component trolley from the SIPLACE D1, D2,
D3 or HF series, regardless of the type of placement machine. 2
The power supply unit allows a component trolley to be set up externally with feeder modules and
also permits function tests to be carried out. 2
It is also possible to carry out a set-up check using a set-up station PC via the integrated CAN bus
interface. 2
The unit is suitable for mains voltages ranging from 88 to 264 V AC. 2
2
Fig. 2 External power supply unit for component trolleys, D1, D2, D3, HF series 03042437-01 (basic unit)
Multi-function plug
for component trolley
Signal lamp 48 V
Switch for CAN
bus address
(CAN ID)
2 External power supply unit for component trolleys from the SIPLACE D1/D2/D3/HF series SIPLACE
11/2006 Edition
20
2
Fig. 3 External power supply unit for component trolleys, D1, D2, D3, HF series 03042437-01 (basic unit)
Combination
mains connector
Compressed air connection
CAN bus interface
Pneumatic unit