SIPLACE X4 S micron X4i S micron.pdf - 第26页

26 Component feeding SIPLACE JTF-S/JTF-M The SIPLACE JTF-S/JTF-M is an automatic and fast changer for standar d JEDEC waffle pack trays. When using the SIPLACE X4i S micron placeme nt machine, you can install a SIPLACE J…

Component feeding

Alternative SIPLACE modules

SIPLACE Glue Feeder

The SIPLACE Glue Feeder

allows you to position dots of

adhesive on a component,

before it is placed. These

dots of adhesive can then be

checked by the SIPLACE

Vision system. The required

glue dots can be defined in

the Component Shape

Editor in SIPLACE Pro and

you can also define whether

individual dots of adhesive

are to be excluded from

inspection or not.

This adhesive function can

be enabled and disabled in

the Component Editor in

SIPLACE Pro. The SIPLACE

Glue Feeder is a special

feeder module which needs

to be manually configured as

a fixed feature on a certain

table track.

Linear Dipping Unit X

(LDU X)

The LDU X is used for coat-

ing Flip-Chips and CSP com-

ponents with flux The flux

container slides with a linear

movement over the dip plate

and coats the cavity in the dip

plate with a layer of flux (pre-

defined layer thickness). The

parameters for coating a

component with flux are pre-

scribed in SIPLACE Pro. The

component is coated and

then the flux layer is

renewed.

This sequence guarantees

consistent processing condi-

tions for the components.

The LDU X is taken into

account as an independent

feeder module type in the

setup. This module can be

set up on the component trol-

leys of the SIPLACE X-

Series. An implemented

warming function allows the

viscosity of the flux to be

altered.

Linear Dipping Unit (occupies 5 loca-

tions of an 8 mm X feeder module

SIPLACE Glue Feeder (occupies 9 locations of an

8 mm X feeder module, max. 1 per head)

Component feeding

SIPLACE JTF-S/JTF-M

The SIPLACE JTF-S/JTF-M

is an automatic and fast

changer for standard JEDEC

waffle pack trays. When

using the SIPLACE X4i S

micron placement machine,

you can install a SIPLACE

JTF-S/JTF-M on a fixed

table, in place of a

component trolley. The

SIPLACE JTF-S/JTF-M

occupies a fixed area of

tracks on the fixed table.

The SIPLACE JTF-S/JTF-M

is available in two versions

• SIPLACE JTF-S

• SIPLACE JTF-M

SIPLACE JTF-S

The SIPLACE JTF-S stores

a stack of up to 30 thin or 20

thick JEDEC waffle pack

trays and supplies them in

succession. The placement

machine can be supplied

with one component type at

constant waffle pack tray

changeover time.

SIPLACE JTF-M

Depending on the magazine

type, the SIPLACE JTF-M

stores up to 18 thin or 14

thick JEDEC waffle pack

trays in an exchangeable

cassette and supplies them

as required. The placement

machine can therefore be

supplied with different com-

ponent types at variable waf-

fle pack tray changeover

times.

JTF-S/JTF-M

Fixed component table

Component feeding

SIPLACE JTF-S/JTF-M

Technical data

SIPLACE JTF-S SIPLACE JTF-M

Width

162 mm 177 mm

Height

587 mm 587 mm

JEDEC waffle pack tray spec-

ification

JEDEC Standard: 95-1 & IEC 60286-5

Storage capacity

Waffle pack tray, thin 30 JEDEC waffle pack trays 18 JEDEC waffle pack trays

Thick waffle pack tray 20 JEDEC waffle pack trays 14 JEDEC waffle pack trays

Waffle pack tray changeover

time

< 5 seconds (depending on

application)

Slot n to n+1 -- 3.5 seconds

Slot 1 to 18 -- 10 seconds

Slot 18 to 1 -- 8.9 seconds

Cassette

Dimensions -- approx. 330 mm x 150 mm x 230

Max. load capacity -- 2.7 kg (150 g each for 18 slots)

Pneumatics

4.1 bar to 5.5 bar 5.2 bar to 9 bar

Compressed air consumption

< 28.3 NL/min. < 28.3 NL/min.