SIPLACE X4 S micron X4i S micron.pdf - 第40页
40 Technical data Electrical Connection and Compressed Air Supply 1 = Electrical connection 2 = Compressed air connection The connections are run into the m achine from below and then con nected to the power su pply or p…
39
Technical data
Electrical ratings and compressed air supply
SIPLACE X4 S micron / X4i S micron
Electrical ratings
Supply voltage Fuse
Main power supply 3 x 360 V~ to 3 x 480 V~ ± 10 %; 50/60 Hz
3 x 200 V~ to 3 x 240 V~ ± 10 %; 50/60 Hz
a
a) With options package
Mains power connection Cable 5 x 4 mm² with CEKON connector (3 x 360 V~ to 3 x 480 V~)
Cable 5 x 4 mm² (3 x 200 V~ to 3 x 240 V)
Energy consumption
With a vacuum pump
b
b) Vacuum pump for C&P20 head only.
With two vacuum pumps
b
Without vacuum pumps
c
c) Optional
Nominal apparent power 2.50 kVA 3.85 kVA 1.30 kVA
Nominal active power 1.70 kW 2.45 kW 1.00 kW
Compressed air supply
Compressed air pressure
values
p
min
p
max
0.5 MPa = 5.0 bar
1.0 MPa = 10 bar
Operating pressure 0.48 MPa ± 0.025 MPa (4.8 bar ± 0.25 bar)
Compressed air connec-
tion
R 3/4" inner thread (pipe thread) with 1/2" hose connection
Compressed air consumption
a
a) Average consumption values.
Placement head configuration Compressed air
consumption
b
with vacuum pump
b) Under normal atmospheric conditions at 20°C and 1013 hPa.
Compressed air
consumption
without vacuum
pump
c
c) Optional
SIPLACE X4 S micron
C&P20 M / C&P20 M / C&P20 M / C&P20 M 260 Nl/min 990 Nl/min
SIPLACE X4i S micron
C&P20 M / C&P20 M / C&P20 M / C&P20 M
C&P20 M / C&P20 M / CPP / CPP
260 Nl/min
370 Nl/min
990 Nl/min
720 Nl/min
Compressed air specification
Particle size 0.1 µm
Particle density 0.1 mg/m³
Maximum oil content
(class 1)
Particle density 0.01 mg/m³
Pressure dewpoint
(class 4)
Dewpoint + 3°
40
Technical data
Electrical Connection and Compressed Air Supply
1 = Electrical connection
2 = Compressed air connection
The connections are run into the machine from below and then connected to the power supply
or pneumatic unit.
41
Technical data
Dimensions and setup conditions
Length
a
Without conveyor extension and without hand guard
Without conveyor extension and with hand guard
With conveyor extension (one end)
With conveyor extension (two ends)
a) Measured at the outer contour of the machine protection.
1915 mm
1948 mm
2175 mm
2435 mm
Width
Outer contour of machine protection
With monitor and keyboard
On the component trolley and table position "outermost" (handle folded in)
On the component trolley and table position "outermost" (handle folded
out)
2647 mm
2940 mm
2890 mm
3640 mm
Height of machine (for PCB conveyor height 930 mm)
Up to upper edge of monitor
With 2-color indicator lamp
With 3-color indicator lamp
Without indicator lamp (height of packaging)
With folded-up protective covers
1630 mm
1852 mm
1893 mm
1658 mm
2120 mm
Machine ground clearance
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
195 mm ± 15 mm
225 mm ± 15 mm
245 mm ± 15 mm
Weight
SIPLACE X4i S micron (machine without component trolley)
SIPLACE X4i S micron (fully equipped with feeder modules)
SIPLACE X4 S micron (machine without component trolley)
SIPLACE X4 S micron (fully equipped with feeder modules)
3430 kg
4000 kg
3430 kg
4000 kg
Location
b
b) Measured at the outer contour of the machine protection and at the keyboard (without conveyor extension).
5.73 m²
Load per unit area
X4 S micron / X4i S micron with 4 component trolley X 6.1 kN/m²
Number of machine feet 6
Max. noise emissions 75 dB (A)
Room temperature Between 15°C and 35°C
Atmospheric humidity 30% to 75% (no higher than 45%
on average to prevent any possi-
bility of condensation on the
machine)