00198076-01_JC_PM_WF1_TX_EN.pdf - 第23页
5 WF 1 TX-Series Maintenance Clean conveyors, lifting tables, gantry cables 4 min 1 / 1 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n …
4 WF 1 TX-Series Maintenance Check and clean the magnetic surfaces of X- and Y-Axis 4 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T3
Wear Part: Consumables:
C3
www.asm-smt.com
7 If OK clean the Y-Axis magnets. 8 Move the gantries to the limit location 2. 9 Repeat steps 2 to 8 for other gantry.
5 WF 1 TX-Series Maintenance Clean conveyors, lifting tables, gantry cables 4 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1
Wear Part: Consumables:
C3
www.asm-smt.com
1 Clean gantry cables for Y-Axis. 2 Clean gantry cables X-Axis. 3 Move the gantries to the limit location 1
and repeat steps 1 to 2 for other gantry.
4 Vacuum all loose components on and
around the whole PCB conveyor.
www.asm-smt.com